AutoCAD Design for Feng Shui Map
Budget: €8 – €30 EUR
I need a professional AutoCAD designer to create a Flying Star Feng Shui map based on a provided floor plan. The final output will be used for Feng Shui analysis and should be precise and editable.
Specific Requirements:
Floor Plan Scaling:
The provided SVG floor plan must be accurately scaled.
Maximum width: 11.64 meters
Maximum height: 7.93 meters
Centroid Calculation:
The true centroid (center of mass) of the floor plan must be precisely calculated. [MASSPROP in AutoCAD]
The centroid should be clearly marked on the floor plan.
Lo Shu Grid Creation:
A 3x3 grid (Lo Shu grid) must be created, centered on the centroid.
The grid squares do not need to match the house sectors in area, but must be aligned and centered.
Grid Rotation:
The 3x3 grid must be rotated clockwise by 62 degrees (NE3).
The centroid must be the exact pivot point for this rotation.
Sector Division:
The rotated grid lines should be extended to divide the floor plan into the nine Flying Star sectors (NE, N, NW, E, Center, W, SE, S, SW).
Optional: Use dashed or colored lines to clearly indicate sector boundaries.
Sector and Star Labeling:
Each of the nine sectors should be labeled with its compass direction (e.g., "NE", "N", "SW").
The Flying Star numbers for Period 8, NE3 orientation, should be placed within each sector of the grid, as follows:
Sector | Mountain Star (M) | Water Star (W)
---|---|---
NE | 5 | 2
N | 6 | 3
NW | 1 | 7
E | 3 | 9
Center | 8 | 5
W | 7 | 4
SE | 9 | 3
S | 4 | 1
SW | 2 | 8
File Delivery:
The final map should be delivered in high-resolution PNG or PDF format.
Crucially, I also need the file in a format that can be easily imported and edited in Adobe Illustrator (or similar vector graphics software). This is essential for future modifications.
Optional: Please provide a version with layers (e.g., a layer with just the floor plan, a layer with the grid, a layer with the labels) for easier editing.
Important Notes for Designer:
All layers must remain fully editable.
Vector-based software (e.g., AutoCAD, Illustrator, Inkscape) must be used to ensure precision and scalability.
The original floor plan SVG should not be altered, other than adding the grid and labels.
Accuracy is paramount. This map will be used for important Feng Shui calculations.
Project Files:
The floor plan will be provided in SVG format upon acceptance of the project.
Budget:
I am looking for a cost-effective solution. Please provide your best price for this project. I am aiming for a low budget due to the specs needed
Skills Required:
Vector Graphics Design
CAD Software (AutoCAD preferred to calculate the centroid, but Illustrator or Inkscape are acceptable)
Feng Shui Knowledge (helpful, but not required - the star numbers are provided)
Attention to Detail
File Conversion (SVG, AI, PDF, PNG)
Specific Requirements:
Floor Plan Scaling:
The provided SVG floor plan must be accurately scaled.
Maximum width: 11.64 meters
Maximum height: 7.93 meters
Centroid Calculation:
The true centroid (center of mass) of the floor plan must be precisely calculated. [MASSPROP in AutoCAD]
The centroid should be clearly marked on the floor plan.
Lo Shu Grid Creation:
A 3x3 grid (Lo Shu grid) must be created, centered on the centroid.
The grid squares do not need to match the house sectors in area, but must be aligned and centered.
Grid Rotation:
The 3x3 grid must be rotated clockwise by 62 degrees (NE3).
The centroid must be the exact pivot point for this rotation.
Sector Division:
The rotated grid lines should be extended to divide the floor plan into the nine Flying Star sectors (NE, N, NW, E, Center, W, SE, S, SW).
Optional: Use dashed or colored lines to clearly indicate sector boundaries.
Sector and Star Labeling:
Each of the nine sectors should be labeled with its compass direction (e.g., "NE", "N", "SW").
The Flying Star numbers for Period 8, NE3 orientation, should be placed within each sector of the grid, as follows:
Sector | Mountain Star (M) | Water Star (W)
---|---|---
NE | 5 | 2
N | 6 | 3
NW | 1 | 7
E | 3 | 9
Center | 8 | 5
W | 7 | 4
SE | 9 | 3
S | 4 | 1
SW | 2 | 8
File Delivery:
The final map should be delivered in high-resolution PNG or PDF format.
Crucially, I also need the file in a format that can be easily imported and edited in Adobe Illustrator (or similar vector graphics software). This is essential for future modifications.
Optional: Please provide a version with layers (e.g., a layer with just the floor plan, a layer with the grid, a layer with the labels) for easier editing.
Important Notes for Designer:
All layers must remain fully editable.
Vector-based software (e.g., AutoCAD, Illustrator, Inkscape) must be used to ensure precision and scalability.
The original floor plan SVG should not be altered, other than adding the grid and labels.
Accuracy is paramount. This map will be used for important Feng Shui calculations.
Project Files:
The floor plan will be provided in SVG format upon acceptance of the project.
Budget:
I am looking for a cost-effective solution. Please provide your best price for this project. I am aiming for a low budget due to the specs needed
Skills Required:
Vector Graphics Design
CAD Software (AutoCAD preferred to calculate the centroid, but Illustrator or Inkscape are acceptable)
Feng Shui Knowledge (helpful, but not required - the star numbers are provided)
Attention to Detail
File Conversion (SVG, AI, PDF, PNG)