AutoCAD Design for Annealing Furnace
Budget: $750 – $1,500 USD
I need a comprehensive AutoCAD design for an annealing furnace. The design should encompass:
- Heating elements
- Temperature control system
- Furnace drawing
The level of detail required is a full assembly with parts and materials. You will need to integrate some specifications I have, although there are no existing drawings to work from.
Ideal skills and experience for the job include:
- Proficiency in AutoCAD
- Experience in designing industrial furnaces
- Ability to interpret and integrate specifications into design
- Attention to detail
- Good understanding of furnace components and systems.
we need oil fired and electric both separately. Single door single bogie and double door double bogie .
Technical Specification
Effective Inside Dimensions
Length .... : 6650 mm (Door to Back)
Width .... : 3000 mm (Door opening)
Height .... : 1250 mm (Door opening over bogie)
Bogie Length .... : 6250 mm
Furnace Inside Dimension
Length ... : 6400 mm
Width ... : 3400 mm
Height ... : 1700 mm
Max. Furnace temperature : 1000 deg . C
Working Temp.(Standard operating Temp ): 600 - 1000 deg. C
Connected Load : 800 KW
Mode of Control : Automatic Programme Controller
Temp. Control Zone : Three
Temp. Recording Point : Eight Nos. with continuous Printing facilities
Rated Capacity : 10 MT./Charge
Temperature Uniformity during : + 10 deg . C
Soaking Between 600 – 930 deg . C
Heat Treatment Cycle : 12 -14 Hours
Max. outside skin temp of Furnace : 40 deg . C above ambient
Mode of loading : EOT Crane
Average Power Consumption for above : 750 – 800 KWH/Ton
Heating Element : Strip 80/20 Ni.Cr.
Loading Capacity of Bogie : 10 MT./Charge
Electric Supply Characteristics
For Heating load : 400 (+ 5) Volts – 3 Phase – 50 Cycles.
For Control instruments : 230 Volts – 1 Phase – 50 Cycles.
Door Lifting Motor : 3 HP
Bogie Haulage Motor : 7.5HP Double bogie
- Heating elements
- Temperature control system
- Furnace drawing
The level of detail required is a full assembly with parts and materials. You will need to integrate some specifications I have, although there are no existing drawings to work from.
Ideal skills and experience for the job include:
- Proficiency in AutoCAD
- Experience in designing industrial furnaces
- Ability to interpret and integrate specifications into design
- Attention to detail
- Good understanding of furnace components and systems.
we need oil fired and electric both separately. Single door single bogie and double door double bogie .
Technical Specification
Effective Inside Dimensions
Length .... : 6650 mm (Door to Back)
Width .... : 3000 mm (Door opening)
Height .... : 1250 mm (Door opening over bogie)
Bogie Length .... : 6250 mm
Furnace Inside Dimension
Length ... : 6400 mm
Width ... : 3400 mm
Height ... : 1700 mm
Max. Furnace temperature : 1000 deg . C
Working Temp.(Standard operating Temp ): 600 - 1000 deg. C
Connected Load : 800 KW
Mode of Control : Automatic Programme Controller
Temp. Control Zone : Three
Temp. Recording Point : Eight Nos. with continuous Printing facilities
Rated Capacity : 10 MT./Charge
Temperature Uniformity during : + 10 deg . C
Soaking Between 600 – 930 deg . C
Heat Treatment Cycle : 12 -14 Hours
Max. outside skin temp of Furnace : 40 deg . C above ambient
Mode of loading : EOT Crane
Average Power Consumption for above : 750 – 800 KWH/Ton
Heating Element : Strip 80/20 Ni.Cr.
Loading Capacity of Bogie : 10 MT./Charge
Electric Supply Characteristics
For Heating load : 400 (+ 5) Volts – 3 Phase – 50 Cycles.
For Control instruments : 230 Volts – 1 Phase – 50 Cycles.
Door Lifting Motor : 3 HP
Bogie Haulage Motor : 7.5HP Double bogie