FreeSWITCH SIP Proxy configuration
Budget: $30 – $100 USD
I have a freshly installed "FreeSWITCH", and I want to configure it with the below example:
The "Outbound Traffic"
- Accept the SIP traffic from the Local "A" (10.0.0.1) SIP Server.
- Redirect the Signaling to the Local "B" (10.0.0.2) SIP Server.
- If the Signaling response is accepted, the traffic (Signaling and Media) will be redirected to the Local "C" (10.0.0.3) SIP Server.
The "Inbound Traffic"
- Accept the SIP traffic from the Local "C" (10.0.0.3) SIP Server.
- Redirect the Signaling to the Local "B" (10.0.0.2) SIP Server.
- If the Signaling response is accepted, the traffic (Signaling and Media) will be redirected to the Local "A" (10.0.0.1) SIP Server.
All the traffic mentioned will be on the local network and should be over 5060/UDP.
NOTES:
- Please don't waste the time if you're not an expert in the FreeSWITCH, Thank you.
- Bot bidder will be reported.
The "Outbound Traffic"
- Accept the SIP traffic from the Local "A" (10.0.0.1) SIP Server.
- Redirect the Signaling to the Local "B" (10.0.0.2) SIP Server.
- If the Signaling response is accepted, the traffic (Signaling and Media) will be redirected to the Local "C" (10.0.0.3) SIP Server.
The "Inbound Traffic"
- Accept the SIP traffic from the Local "C" (10.0.0.3) SIP Server.
- Redirect the Signaling to the Local "B" (10.0.0.2) SIP Server.
- If the Signaling response is accepted, the traffic (Signaling and Media) will be redirected to the Local "A" (10.0.0.1) SIP Server.
All the traffic mentioned will be on the local network and should be over 5060/UDP.
NOTES:
- Please don't waste the time if you're not an expert in the FreeSWITCH, Thank you.
- Bot bidder will be reported.