labview and arduino
Budget: $10 – $30 USD
Description:
• Simulates the filling of a batch of bottles with a mixture of 3 different
liquids.
• Procedure
• Each tank has a capacity of 500 gallons.
• The bottles have a capacity of 6 gallons.
• Types of Mix
• Mix #1 = Liquid 1 (2 gal.), Liquid 2 (2 gal.), Liquid 3 (2 gal.)
• Mix #2 = Liquid 1 (3 gal.), Liquid 2 (1 gal.), Liquid 3 (2 gal.)
• Mix #3 = Liquid 1 (1 gal.), Liquid 2 (2 gal.), Liquid 3 (3 gal.
Movement speed - Regulates the speed of the bottle on the band - Potentiometer
Valves ## (x3) - Enter raw material to their respective tank (0 – 5 gal/sec) - Potentiometer
Emergency Stop - It is used to stop or restart the entire process. -PushButton
Process Pause - It is used to stop the operation of the process for a moment, when pressing it again the movement is restarted where it left off. -Push button
Start of Filling - This button can be activated when the configuration of the number of bottles to be filled and the selected mix has already been completed - PushButton
STOP - Stops the entire program. -PushButton
Bottle Position Indicators (x3) - A led should light up when the bottle is in position to start filling the corresponding liquid. It is a Led for each station - LED
Plant Temperature - You must indicate the ambient temperature of the plant - LM35DZ
Bottle Count - Using an infrared sensor, the simulation must be carried out that the bottle has already reached the end of the band - Infrared Sensor
These signals must also be displayed on the front panel.
It has to go exactly with the same images that the attached file has, as well as attach a video at the time of delivery, how it works both on the labview side and with the arduino.
• Simulates the filling of a batch of bottles with a mixture of 3 different
liquids.
• Procedure
• Each tank has a capacity of 500 gallons.
• The bottles have a capacity of 6 gallons.
• Types of Mix
• Mix #1 = Liquid 1 (2 gal.), Liquid 2 (2 gal.), Liquid 3 (2 gal.)
• Mix #2 = Liquid 1 (3 gal.), Liquid 2 (1 gal.), Liquid 3 (2 gal.)
• Mix #3 = Liquid 1 (1 gal.), Liquid 2 (2 gal.), Liquid 3 (3 gal.
Movement speed - Regulates the speed of the bottle on the band - Potentiometer
Valves ## (x3) - Enter raw material to their respective tank (0 – 5 gal/sec) - Potentiometer
Emergency Stop - It is used to stop or restart the entire process. -PushButton
Process Pause - It is used to stop the operation of the process for a moment, when pressing it again the movement is restarted where it left off. -Push button
Start of Filling - This button can be activated when the configuration of the number of bottles to be filled and the selected mix has already been completed - PushButton
STOP - Stops the entire program. -PushButton
Bottle Position Indicators (x3) - A led should light up when the bottle is in position to start filling the corresponding liquid. It is a Led for each station - LED
Plant Temperature - You must indicate the ambient temperature of the plant - LM35DZ
Bottle Count - Using an infrared sensor, the simulation must be carried out that the bottle has already reached the end of the band - Infrared Sensor
These signals must also be displayed on the front panel.
It has to go exactly with the same images that the attached file has, as well as attach a video at the time of delivery, how it works both on the labview side and with the arduino.