Trainer based on MPU-6050

Project is to code for below equipment & functionality.
Delivery in form of code which can be compiled with needed libraries.

1. Hardware
a. NodeMcu v3 CP2102
b. GY-521 (MPU6050)
c. Momentary push Button
d. Variable resistor knob
e. LED light
f. Buzzer

2. Functionality

Trainer 1
• Track accelerometer & display on web interface on timescale (XYZ angles, speed of angle change & acceleration of change)
• Draw position/movement based on accelerometer readings (ZX)
• Trigger definition based on XYZ angles, speed of angle change & acceleration of change (>/< for each)
• Once triggered, show Drawn movement in 3 colors (before triggered)
1. Trigger -1 second (definable time) -red
2. Trigger -2 second (definable time) -blue
3. Trigger -3 second (definable time) -green
• New recording trigger definition based in XYZ angles or hardware momentary push buton
• WIFI AP setup & website host for trigger setup & display

Trainer 2
• Track accelerometer & display on web interface on timescale (XYZ angles, speed of angle change & acceleration of change)
• Trigger definition based on XYZ angles, speed of angle change & acceleration of change (>/< for each)
• Once triggered turn LED on for 200ms
• New loop trigger definition based in XYZ angles or hardware momentary push buton
• WIFI AP setup & website host for trigger setup & display

Trainer 3
• Measure speed of voltage change from variable resistor
• Define trigger speed value
• Once triggertered buzz for 500ms