Gamepad Dabble ESP32
Budget: $10 – $30 USD
We are currently working on a POC for a project, here we need 4 pins to change high/low depending on the angle of the joypad in the dabble app, and 6 pins need to go high/ low depending on buttons pussed in the app (when pressed high, when relesased low).
Very simple, will add example code below, where serial monitor already displays angle out from the app, and also if buttons are pressed, so all you need to do is add function to a given action.
pin 21 = Up
pin 19 = down
pin 18 = left
pin 05 = right
pin 13 = start
pin 15 = select
pin 35 = X
pin 13 = O
pin 14 = Square
pin 12 = Triangle
Should be a very simple job for anyone with just a little experience in Arduino/ esp32
Very simple, will add example code below, where serial monitor already displays angle out from the app, and also if buttons are pressed, so all you need to do is add function to a given action.
pin 21 = Up
pin 19 = down
pin 18 = left
pin 05 = right
pin 13 = start
pin 15 = select
pin 35 = X
pin 13 = O
pin 14 = Square
pin 12 = Triangle
Should be a very simple job for anyone with just a little experience in Arduino/ esp32