Assist with arduino code for 14 switches to toggle mute status via RS232
Budget: $50 – $0 AUD
Description of the code:
The code defines a set of pins that control LEDs and switches connected to an ATmega2560 microcontroller. The LEDs can be turned on and off using the defined pins, and the switches can be used to trigger interrupts that change the state of the LEDs. The code is written in C++ and is intended to be compiled and uploaded to the microcontroller using an appropriate IDE and hardware programmer.
Problem:
The interrupts defined in the code are not working as expected. It is unclear whether the pins defined for the switches are compatible with interrupts on the ATmega2560 microcontroller. Additionally, there may be issues with the way the interrupts are configured and handled in the code.
To resolve the issue, a developer with experience in microcontroller programming and interrupt handling should review the code and provide appropriate modifications and recommendations.
The code defines a set of pins that control LEDs and switches connected to an ATmega2560 microcontroller. The LEDs can be turned on and off using the defined pins, and the switches can be used to trigger interrupts that change the state of the LEDs. The code is written in C++ and is intended to be compiled and uploaded to the microcontroller using an appropriate IDE and hardware programmer.
Problem:
The interrupts defined in the code are not working as expected. It is unclear whether the pins defined for the switches are compatible with interrupts on the ATmega2560 microcontroller. Additionally, there may be issues with the way the interrupts are configured and handled in the code.
To resolve the issue, a developer with experience in microcontroller programming and interrupt handling should review the code and provide appropriate modifications and recommendations.