Arduino controlled Four channel Tens / EMS circuit board
Budget: $250 – $750 AUD
Build an Arduino controlled four channel Tens / EMS circuit board.
Four Channel - Each channel will provide independent control around the following parameters:
o Each channel to be connected to two electrode pads.
o Each channels requires electrical isolation between each other channel.
o Adjustable Frequency (1-150 Hz)
o Adjustable Intensity set between 0-120 mA at 40-100v.
o Adjustable pulse duration between (100uS and 300uS).
o Adjustable Sequence and duration on/off as per channel timing xlsx - attached.
• Adjustable Overall intensity (all four channels simultaneously)
• USB powered preferred (5V)
Four Channel - Each channel will provide independent control around the following parameters:
o Each channel to be connected to two electrode pads.
o Each channels requires electrical isolation between each other channel.
o Adjustable Frequency (1-150 Hz)
o Adjustable Intensity set between 0-120 mA at 40-100v.
o Adjustable pulse duration between (100uS and 300uS).
o Adjustable Sequence and duration on/off as per channel timing xlsx - attached.
• Adjustable Overall intensity (all four channels simultaneously)
• USB powered preferred (5V)