Arduino Hydroponics Program
Budget: $10 – $30 USD
I am needing a programmer for a my hydroponic project
Hardware is Arduino mega 2560, rtc DS3231, I2C 1602 LCD and 2 relays.
Needs to do the following:
1. Display date and time
2. Display days planted
3. One button to start a new garden
4. Reminder that comes on every 14 days to add nutrient and a reset button to start the 14 day cycle over.
5. Set on and off times for both relays, one relay will control a water pump and one will control grow lights.
6. Scroll screen and uses buttons to change settings. Date,time,relays and so on.
I would need the pin numbers that are assigned to the functions so i can wire up the push buttons.
If interested please contact me and also if you have any questions about it.
Thanks in Advance.
Hardware is Arduino mega 2560, rtc DS3231, I2C 1602 LCD and 2 relays.
Needs to do the following:
1. Display date and time
2. Display days planted
3. One button to start a new garden
4. Reminder that comes on every 14 days to add nutrient and a reset button to start the 14 day cycle over.
5. Set on and off times for both relays, one relay will control a water pump and one will control grow lights.
6. Scroll screen and uses buttons to change settings. Date,time,relays and so on.
I would need the pin numbers that are assigned to the functions so i can wire up the push buttons.
If interested please contact me and also if you have any questions about it.
Thanks in Advance.