Arduino-Based Lora Analog Switches
Budget: ₹600 – ₹1,500 INR
I'm looking for an Arduino expert skilled in Lora for a project involving Lora analog switches. The primary function of these switches is to monitor device status in real-time.
Key Responsibilities:
- Design and implement Lora analog switches using Arduino.
- Integrate light sensors with the Arduino.
- Ensure real-time device status updates.
Ideal Skills:
- Proficiency in Arduino programming.
- Experience with Lora technology.
- Knowledge of integrating light sensors.
- Capability to design remote control switches.
- Understanding of real-time data transmission.
Please note, the project is focused on using light sensors for monitoring device status. Your experience with these components will be crucial.
Project Details
Lora Analog Sensor Switches
Want an arduino sketch for 5 analog switches as transmitter and 5 outputs at the receiving end using Lora ra-02 modules and nano.. active low inputs with voltage threshold of 2.5v with hysteresis at transmitter and all the outputs at the receiver are set high as default, when the switches are grounded (voltage goes below 2.5v) their respective output goes low after 5 seconds, and when the switch is released (voltage goes above 2.5v) the output goes high after 5 seconds, same logic to be applied on all outputs.
Should have an unique id for each pair, so that multiple pair can be set nearby without interference, max range settings to be set
A status led to show connection on both modules
- Flashes when no signal
- High when connected
- When connection fails all the outputs of the receiver should go HIGH, irrelevant of the switch status
Key Responsibilities:
- Design and implement Lora analog switches using Arduino.
- Integrate light sensors with the Arduino.
- Ensure real-time device status updates.
Ideal Skills:
- Proficiency in Arduino programming.
- Experience with Lora technology.
- Knowledge of integrating light sensors.
- Capability to design remote control switches.
- Understanding of real-time data transmission.
Please note, the project is focused on using light sensors for monitoring device status. Your experience with these components will be crucial.
Project Details
Lora Analog Sensor Switches
Want an arduino sketch for 5 analog switches as transmitter and 5 outputs at the receiving end using Lora ra-02 modules and nano.. active low inputs with voltage threshold of 2.5v with hysteresis at transmitter and all the outputs at the receiver are set high as default, when the switches are grounded (voltage goes below 2.5v) their respective output goes low after 5 seconds, and when the switch is released (voltage goes above 2.5v) the output goes high after 5 seconds, same logic to be applied on all outputs.
Should have an unique id for each pair, so that multiple pair can be set nearby without interference, max range settings to be set
A status led to show connection on both modules
- Flashes when no signal
- High when connected
- When connection fails all the outputs of the receiver should go HIGH, irrelevant of the switch status