Device PCB Prototype Design
Budget: ₹400 – ₹750 INR
I need a hardware engineer who can take full ownership of the schematic capture, multilayer PCB layout and initial bring-up. The work covers analog, digital and RF circuit blocks, so I’m looking for someone comfortable weaving those domains into a single board that will later need to pass regulatory testing.
Right now we’re firmly in the prototype-development phase. I’ll supply the core requirements, component selections and functional blocks; you translate that into clean schematics, an optimized stack-up, a tidy BOM and manufacturing files (Gerbers/ODB++, pick-and-place, IPC-356). Having your own small lab is essential—oscilloscope, power supplies, SMD rework station, whatever you normally use to power-up and debug fresh boards. If you can reflow a couple of test units yourself and run the smoke-test before I see them, that will save us both time.
I already have relationships with a PCB fab/assembly house and can ship boards to you, but if you have a local partner, you trust we can compare lead-times and costs.
If this lines up with your skill set and you’re ready to jump straight into hands-on prototype work, let’s talk.
Right now we’re firmly in the prototype-development phase. I’ll supply the core requirements, component selections and functional blocks; you translate that into clean schematics, an optimized stack-up, a tidy BOM and manufacturing files (Gerbers/ODB++, pick-and-place, IPC-356). Having your own small lab is essential—oscilloscope, power supplies, SMD rework station, whatever you normally use to power-up and debug fresh boards. If you can reflow a couple of test units yourself and run the smoke-test before I see them, that will save us both time.
I already have relationships with a PCB fab/assembly house and can ship boards to you, but if you have a local partner, you trust we can compare lead-times and costs.
If this lines up with your skill set and you’re ready to jump straight into hands-on prototype work, let’s talk.