Altium Multi-Layer PCB Design
Budget: $30 – $250 USD
I need a multi-layer board laid out in Altium Designer for a new consumer-electronics product. All core circuitry is already defined in a draft schematic; what’s missing is a clean, production-ready PCB layout that respects tight space constraints and high-speed signal integrity.
You will receive:
• My Altium schematic files and mechanical outline
• A stack-up suggestion, plus the list of component manufacturers I prefer for critical parts
Your tasks:
• Optimise the layer stack and route all nets, keeping EMI low and differential pairs balanced
• Apply Altium rules for clearance, impedance control and DRC so the file is release-ready
• Produce the final PCB files, manufacturing outputs (Gerbers, drill, pick-and-place, ODB++), and a neatly organised BOM using my preferred suppliers
Acceptance criteria: the board passes Altium’s full design rule check with zero errors, matches the mechanical envelope, and every part on the BOM is sourced from a vendor on my list or flagged for discussion.
If you’re comfortable with high-density consumer boards and can turn this around quickly, let’s get started.
You will receive:
• My Altium schematic files and mechanical outline
• A stack-up suggestion, plus the list of component manufacturers I prefer for critical parts
Your tasks:
• Optimise the layer stack and route all nets, keeping EMI low and differential pairs balanced
• Apply Altium rules for clearance, impedance control and DRC so the file is release-ready
• Produce the final PCB files, manufacturing outputs (Gerbers, drill, pick-and-place, ODB++), and a neatly organised BOM using my preferred suppliers
Acceptance criteria: the board passes Altium’s full design rule check with zero errors, matches the mechanical envelope, and every part on the BOM is sourced from a vendor on my list or flagged for discussion.
If you’re comfortable with high-density consumer boards and can turn this around quickly, let’s get started.