Private Aircraft Fuselage Design
Budget: $250 – $750 USD
Brief Overview:
This aircraft has 17 Formers in its Fuselage (0-16). Provided are the Cutaway sketches for the formers.
Within the data sheet you'll see the radius dimensions, as well as dimensions showing the distance from the fuselage Centerline to the bottom center section(only seen in Formers 2-11). All information is provided in the Data Sheet or on Former Cutaway.
Step 1 Create the Formers
Step 2 Mark and Cut Stringer holes in former (24 holes 1inch X 1 inch) see attachment F1.1.PNG
Step 3 Connect Fuselage Formers with longerons.
Feel free to ask any questions. Ill be there to communicate with you every step of the way. Must be completed in SolidWorks,
Mile Stones will be released after each completed and approved Former. Then remaining balance upon Final Assembly.
This aircraft has 17 Formers in its Fuselage (0-16). Provided are the Cutaway sketches for the formers.
Within the data sheet you'll see the radius dimensions, as well as dimensions showing the distance from the fuselage Centerline to the bottom center section(only seen in Formers 2-11). All information is provided in the Data Sheet or on Former Cutaway.
Step 1 Create the Formers
Step 2 Mark and Cut Stringer holes in former (24 holes 1inch X 1 inch) see attachment F1.1.PNG
Step 3 Connect Fuselage Formers with longerons.
Feel free to ask any questions. Ill be there to communicate with you every step of the way. Must be completed in SolidWorks,
Mile Stones will be released after each completed and approved Former. Then remaining balance upon Final Assembly.
Related categories:
CAD/CAM
Solidworks
Mechanical Engineering
Aerospace Engineering
Aircraft Structures