DJI Agras T100 RF Suppression
Budget: $1,500 – $3,000 USD
We are seeking proposals from qualified UAV engineer for the customization of a DJI Agras T100 via physical and/or firmware modification.
Deliverables: You are to propose and implement modifications to the Agras T100 which allows it to autonomously complete pre-programmed lift missions without broadcasting an RF signal. This includes broadcasting no Remote.Identification (“RID”) per the facilitated regulatory exemption. Also please identify software to plan autonomous missions. Your proposed methods to complete the project can be hardware and/or firmware modifications. The modifications should be implemented without compromising the integrity of the flight system.
Background: Our client had facilitated a 14 CFR 89 exemption from Remote ID for the purpose of aeronautical research. Physical access to the T100 is available on Long Island, New York if you require physical access to complete the modifications.
Pre-programmed mission example: Autonomously takeoff, quickly pickup it's payload via non-retractable winch system (payload to be attached with assistance from a person on the ground), deliver the payload (payload detached with assistance from someone on the ground), land at a nearby location, and power down. The T100 should travel along a preselected route. This should all be completed without operator action or broadcasting an RF signal. Pickup and dropoff points should be accurate within roughly five feet of desired point. (The T100’s lift system is DJI’s dual-battery lift kit.)
Qualifications: (1) Experience successfully performing similiar modifications is required. (2) A professional-level understanding of UAVs and their systems is required. (3) Knowledge of DJI’s Agras line is preferred. (4) Living within traveling distance to Long Island is preferred.
Deadlines: Our aim is to select a proposal by May 29th and have the work completed by June 5th.
Proposals: Please submit a proposal no later than May 29th for consideration. In your proposal, please include (1) an outline of your method and the major tasks which must be performed to successfully complete this project, (2) your qualifications and experience, including relevant education and employment, as well as prior work with UAVs, the DJI brand specifically, and performing the tasks you are proposing, (3) your geographic location, and if you do not intend to perform the modification work in person, how you intend to do so, (4) your quoted cost for the project, including any travel and equipment expenses. While cost is important, we care more about the quality of the work. Please also include (5) a statement that you will be able to complete the work by 6/5/2026.
Questions: Please message us with any questions and we will respond with 24 hours.
We look forward to reviewing your proposals. Thank you!
Deliverables: You are to propose and implement modifications to the Agras T100 which allows it to autonomously complete pre-programmed lift missions without broadcasting an RF signal. This includes broadcasting no Remote.Identification (“RID”) per the facilitated regulatory exemption. Also please identify software to plan autonomous missions. Your proposed methods to complete the project can be hardware and/or firmware modifications. The modifications should be implemented without compromising the integrity of the flight system.
Background: Our client had facilitated a 14 CFR 89 exemption from Remote ID for the purpose of aeronautical research. Physical access to the T100 is available on Long Island, New York if you require physical access to complete the modifications.
Pre-programmed mission example: Autonomously takeoff, quickly pickup it's payload via non-retractable winch system (payload to be attached with assistance from a person on the ground), deliver the payload (payload detached with assistance from someone on the ground), land at a nearby location, and power down. The T100 should travel along a preselected route. This should all be completed without operator action or broadcasting an RF signal. Pickup and dropoff points should be accurate within roughly five feet of desired point. (The T100’s lift system is DJI’s dual-battery lift kit.)
Qualifications: (1) Experience successfully performing similiar modifications is required. (2) A professional-level understanding of UAVs and their systems is required. (3) Knowledge of DJI’s Agras line is preferred. (4) Living within traveling distance to Long Island is preferred.
Deadlines: Our aim is to select a proposal by May 29th and have the work completed by June 5th.
Proposals: Please submit a proposal no later than May 29th for consideration. In your proposal, please include (1) an outline of your method and the major tasks which must be performed to successfully complete this project, (2) your qualifications and experience, including relevant education and employment, as well as prior work with UAVs, the DJI brand specifically, and performing the tasks you are proposing, (3) your geographic location, and if you do not intend to perform the modification work in person, how you intend to do so, (4) your quoted cost for the project, including any travel and equipment expenses. While cost is important, we care more about the quality of the work. Please also include (5) a statement that you will be able to complete the work by 6/5/2026.
Questions: Please message us with any questions and we will respond with 24 hours.
We look forward to reviewing your proposals. Thank you!