Professional Vector Logo Creation
Budget: $30 – $250 AUD
I need a professional vector logo created from a provided sample. The sample will be supplied in PDF/AI format.
Requirements:
- Convert the sample into a high-quality vector logo
Here is a detailed description of the BRJ Services logo based on everything extracted directly from the GIMP and Photoshop source files:
BRJ Services Logo — Designer Brief
Overall Composition
The logo consists of three stacked elements arranged vertically: a large typographic monogram "BRJ" in the upper two-thirds, a flowing wave/swoosh graphic that cuts diagonally across the letters, and the word "SERVICES" centred beneath in smaller text. The total logo proportions are approximately 3:2 wide to tall (landscape orientation).
Element 1 — The BRJ Monogram
The three letters B, R, and J are set in Poppins Bold (weight 700), uppercase, arranged side by side with normal letter spacing. The letters are large and bold — they form the dominant visual mass of the logo.
Each letter is rendered in two colours split horizontally at the midpoint of the letterform:
The top half of every letter is Sky Blue — #0089BE
The bottom half of every letter is Amber Orange — #F5A923
The colour split is a clean horizontal cut straight across all three letters simultaneously at the same y-position, so the blue and orange halves align perfectly across B, R, and J as a group. There are no gradients — each half is a flat, solid colour.
Element 2 — The Green Swoosh / Wave
A single flowing S-curve ribbon in Grass Green — #8DBE46 passes horizontally across the full width of the logo, cutting through the BRJ letters. It sits on top of the letters in the layer stack.
The shape is critical and distinctive:
Both the left tip and the right tip come to a sharp pointed end — like a leaf or eye shape, not a blunt or rounded end
The left tip points toward the lower-left and sits roughly at the vertical midpoint of the letters
The wave rises up and over the B, dips down through the centre between R and J, then rises again and the right tip points toward the upper-right, finishing past the right edge of the J
The ribbon is thickest at its centre (roughly the height of a capital letter's mid-stroke) and tapers to nothing at both pointed tips
The overall path is a gentle S-curve or sinusoidal wave — smooth, with no kinks or corners anywhere along the edges
The wave extends slightly beyond the left edge of the B and the right edge of the J
The wave creates a visual layering effect — it passes in front of the letters, so it partially obscures portions of B, R and J where it crosses them.
Element 3 — "SERVICES" Wordmark
The word SERVICES sits below the BRJ monogram, horizontally centred under the group.
Font: Montserrat Black (weight 900)
Case: ALL CAPITALS
Colour: Rich Black — #111111
Tracking: Wide letter-spacing — the characters are spread out with significant space between each letter, giving the word an airy, architectural feel
Size: Approximately one-quarter the cap-height of the BRJ letters
Alignment: Centred under the BRJ group, with generous space between the bottom of the J and the top of the SERVICES text
Layer / Stacking Order (back to front)
Orange BRJ — bottom layer
Blue BRJ — directly on top of orange (the horizontal clip creates the two-tone split effect)
Green swoosh — on top of both letter layers, partially obscuring them
SERVICES text — foreground, below and separate from all of the above
Colours Summary
Element Colour HEX CMYK Pantone
BRJ top half Sky Blue
#0089BE C100 M28 Y0 K25 299 C
BRJ bottom half Amber Orange
#F5A923 C0 M25 Y79 K9 7409 C
Swoosh Grass Green
#8DBE46 C26 M0 Y63 K25 368 C
SERVICES Rich Black
#111111 C0 M0 Y0 K100 Black C
Fonts Summary
Element Font Weight Source
BRJ letters Poppins Bold 700 Google Fonts
SERVICES Montserrat Black 900 Google Fonts
Key Design Notes for the Designer
The blue/orange colour split on the letters is not achieved with two separate coloured letter outlines — rather, the full letter is drawn in orange, then the full letter is drawn again in blue on top, and the blue is clipped to show only the top half. The result is that the orange and blue share a perfectly straight horizontal boundary across all three letters.
The swoosh tips must be sharp points, not rounded. The shape is essentially a very elongated leaf rotated to follow an S-curve path.
The background is white with no border, shadow, or container shape around the logo.
There are no gradients, drop shadows, glows, or decorative effects anywhere — every element is flat solid colour.
The logo should be delivered as a vector file (SVG, AI, or EPS) so it can scale to any size for print and signage.
Ideal Skills and Experience:
- Expertise in Adobe Illustrator or similar vector graphic software
- Strong portfolio showcasing professional logos
- Attention to detail and precision in vector work
Requirements:
- Convert the sample into a high-quality vector logo
Here is a detailed description of the BRJ Services logo based on everything extracted directly from the GIMP and Photoshop source files:
BRJ Services Logo — Designer Brief
Overall Composition
The logo consists of three stacked elements arranged vertically: a large typographic monogram "BRJ" in the upper two-thirds, a flowing wave/swoosh graphic that cuts diagonally across the letters, and the word "SERVICES" centred beneath in smaller text. The total logo proportions are approximately 3:2 wide to tall (landscape orientation).
Element 1 — The BRJ Monogram
The three letters B, R, and J are set in Poppins Bold (weight 700), uppercase, arranged side by side with normal letter spacing. The letters are large and bold — they form the dominant visual mass of the logo.
Each letter is rendered in two colours split horizontally at the midpoint of the letterform:
The top half of every letter is Sky Blue — #0089BE
The bottom half of every letter is Amber Orange — #F5A923
The colour split is a clean horizontal cut straight across all three letters simultaneously at the same y-position, so the blue and orange halves align perfectly across B, R, and J as a group. There are no gradients — each half is a flat, solid colour.
Element 2 — The Green Swoosh / Wave
A single flowing S-curve ribbon in Grass Green — #8DBE46 passes horizontally across the full width of the logo, cutting through the BRJ letters. It sits on top of the letters in the layer stack.
The shape is critical and distinctive:
Both the left tip and the right tip come to a sharp pointed end — like a leaf or eye shape, not a blunt or rounded end
The left tip points toward the lower-left and sits roughly at the vertical midpoint of the letters
The wave rises up and over the B, dips down through the centre between R and J, then rises again and the right tip points toward the upper-right, finishing past the right edge of the J
The ribbon is thickest at its centre (roughly the height of a capital letter's mid-stroke) and tapers to nothing at both pointed tips
The overall path is a gentle S-curve or sinusoidal wave — smooth, with no kinks or corners anywhere along the edges
The wave extends slightly beyond the left edge of the B and the right edge of the J
The wave creates a visual layering effect — it passes in front of the letters, so it partially obscures portions of B, R and J where it crosses them.
Element 3 — "SERVICES" Wordmark
The word SERVICES sits below the BRJ monogram, horizontally centred under the group.
Font: Montserrat Black (weight 900)
Case: ALL CAPITALS
Colour: Rich Black — #111111
Tracking: Wide letter-spacing — the characters are spread out with significant space between each letter, giving the word an airy, architectural feel
Size: Approximately one-quarter the cap-height of the BRJ letters
Alignment: Centred under the BRJ group, with generous space between the bottom of the J and the top of the SERVICES text
Layer / Stacking Order (back to front)
Orange BRJ — bottom layer
Blue BRJ — directly on top of orange (the horizontal clip creates the two-tone split effect)
Green swoosh — on top of both letter layers, partially obscuring them
SERVICES text — foreground, below and separate from all of the above
Colours Summary
Element Colour HEX CMYK Pantone
BRJ top half Sky Blue
#0089BE C100 M28 Y0 K25 299 C
BRJ bottom half Amber Orange
#F5A923 C0 M25 Y79 K9 7409 C
Swoosh Grass Green
#8DBE46 C26 M0 Y63 K25 368 C
SERVICES Rich Black
#111111 C0 M0 Y0 K100 Black C
Fonts Summary
Element Font Weight Source
BRJ letters Poppins Bold 700 Google Fonts
SERVICES Montserrat Black 900 Google Fonts
Key Design Notes for the Designer
The blue/orange colour split on the letters is not achieved with two separate coloured letter outlines — rather, the full letter is drawn in orange, then the full letter is drawn again in blue on top, and the blue is clipped to show only the top half. The result is that the orange and blue share a perfectly straight horizontal boundary across all three letters.
The swoosh tips must be sharp points, not rounded. The shape is essentially a very elongated leaf rotated to follow an S-curve path.
The background is white with no border, shadow, or container shape around the logo.
There are no gradients, drop shadows, glows, or decorative effects anywhere — every element is flat solid colour.
The logo should be delivered as a vector file (SVG, AI, or EPS) so it can scale to any size for print and signage.
Ideal Skills and Experience:
- Expertise in Adobe Illustrator or similar vector graphic software
- Strong portfolio showcasing professional logos
- Attention to detail and precision in vector work