Product Guide Editing & Revision
Budget: $10 – $30 USD
1. Please add an asterisk at the bottom of page 2 stating “all threads have a 1mm pitch”. Also please edit the text of the following items on page 2:
— M8 x 533 —> M8 x 533mm (3 pcs)
— M6 x 1 x 90 —> M6 x 90mm (8 pcs)
— M6 x 1 x 60 —> M6 x 60mm (11 pcs)
— BOLT M6 x 1 x 60 —> M6 x 60mm (14pcs)
— NUT M8 —> NUT M8 (6 pcs)
— PROFILE CAP —> PROFILE CAP (4 pcs)
— PRONGED NUT M8 —> THREADED INSERT M8 (3pcs)
2. Please change the text “All M6x1 holes are 30mm deep” on page 1 to “The tapping of all M6 holes is 30mm deep”. See “Thread hole depth” attachment.
3. Please specify that the bolts in C1 and C2 seen on page 3 (see “specify bolts”) are the bolts on page 1 (M6 x 60mm).
4. Specify the measurements of the placement of the holes on for H4A and H4B (207mm); H3A and H3B (414mm).
5. We will also need to add a rubber adhesive strip to the accessories list on page 2. The strip should be 840mm long (“see adhesive strip”)
6. Replace pronged nut on page 2 and C5 with threaded insert (see “threaded insert” for details).
7. There should be two versions of the drawing. 1st version should be the “Product Guide - Latest.pdf” with the above six edits. 2nd version should have the same six edits, but also the following changes:
— Remove H1A and H1B (858mm).
— Rename H3A and H3B (636mm) to H1A and H1B.
— Rename H2 to H3.
— Add two new parts called H2A and H2B. Both these should be 222mm. H2A should have a 6mm hole. H2B should have a 10mm hole. See “H2A”, “H2B” and H2A/B” for details.
— M8 x 533 —> M8 x 533mm (3 pcs)
— M6 x 1 x 90 —> M6 x 90mm (8 pcs)
— M6 x 1 x 60 —> M6 x 60mm (11 pcs)
— BOLT M6 x 1 x 60 —> M6 x 60mm (14pcs)
— NUT M8 —> NUT M8 (6 pcs)
— PROFILE CAP —> PROFILE CAP (4 pcs)
— PRONGED NUT M8 —> THREADED INSERT M8 (3pcs)
2. Please change the text “All M6x1 holes are 30mm deep” on page 1 to “The tapping of all M6 holes is 30mm deep”. See “Thread hole depth” attachment.
3. Please specify that the bolts in C1 and C2 seen on page 3 (see “specify bolts”) are the bolts on page 1 (M6 x 60mm).
4. Specify the measurements of the placement of the holes on for H4A and H4B (207mm); H3A and H3B (414mm).
5. We will also need to add a rubber adhesive strip to the accessories list on page 2. The strip should be 840mm long (“see adhesive strip”)
6. Replace pronged nut on page 2 and C5 with threaded insert (see “threaded insert” for details).
7. There should be two versions of the drawing. 1st version should be the “Product Guide - Latest.pdf” with the above six edits. 2nd version should have the same six edits, but also the following changes:
— Remove H1A and H1B (858mm).
— Rename H3A and H3B (636mm) to H1A and H1B.
— Rename H2 to H3.
— Add two new parts called H2A and H2B. Both these should be 222mm. H2A should have a 6mm hole. H2B should have a 10mm hole. See “H2A”, “H2B” and H2A/B” for details.