KiCad PCB Design
Budget: £20 – £250 GBP
KiCad PCB Design
I need someone with experience and knowledge of Electronics to do a KiCad PCB design for me.
I would do it myself, but I have few Time Sensitive Projects ongoing and I don’t have time to complete this one.
The Project is not complicated and involves 3 simple Modules whose Schematics, Diagrams, Libraries and Documentations can be found online but research will be needed.
The 3 Modules that I need in this PCB are:
- ESP32
- DC 5V/5A Bistable Self-locking Switch Module
- DC 5V/2A Charge/Discharge(boost)/battery protection/indicator module 3.7V Lithium Battery
Please find attached pictures of all Modules to this Project.
PROJECT:
So, the idea is simple.
Single PCB where the ESP32 is powered by Rechargeable 3.7V battery trough the Charge/Discharge Module and ON/OFF of the whole PCB is controlled by the Bistable Self-locking Switch Module.
The PCB will have 1 Type-C port to charge the Battery trough the Charge/Discharge Module.
ESP32 does not need “BOOT” and “EN” Buttons, but the Pads will remain on the circuit board.
The USB port from the ESP32 will be removed as there is no need for it but the USB Pins will remain on the PCB with standard 2.54 mm spacing.
IMPORTANT:
Please find attached images of all 3 modules and familiarise yourself with them before placing a Bid.
Auto Bid is not recommended, and these Users and their Proposal will be disregarded.
Unreasonable Price Proposals will not be considered.
The Project is Time Sensitive, and 7-10 Days is the maximum Work Time.
After Completion, The Project will be sent to PCBWAY or JLCPCB or alternative manufacturer for the PCB’s to be Manufactured.
I need someone with experience and knowledge of Electronics to do a KiCad PCB design for me.
I would do it myself, but I have few Time Sensitive Projects ongoing and I don’t have time to complete this one.
The Project is not complicated and involves 3 simple Modules whose Schematics, Diagrams, Libraries and Documentations can be found online but research will be needed.
The 3 Modules that I need in this PCB are:
- ESP32
- DC 5V/5A Bistable Self-locking Switch Module
- DC 5V/2A Charge/Discharge(boost)/battery protection/indicator module 3.7V Lithium Battery
Please find attached pictures of all Modules to this Project.
PROJECT:
So, the idea is simple.
Single PCB where the ESP32 is powered by Rechargeable 3.7V battery trough the Charge/Discharge Module and ON/OFF of the whole PCB is controlled by the Bistable Self-locking Switch Module.
The PCB will have 1 Type-C port to charge the Battery trough the Charge/Discharge Module.
ESP32 does not need “BOOT” and “EN” Buttons, but the Pads will remain on the circuit board.
The USB port from the ESP32 will be removed as there is no need for it but the USB Pins will remain on the PCB with standard 2.54 mm spacing.
IMPORTANT:
Please find attached images of all 3 modules and familiarise yourself with them before placing a Bid.
Auto Bid is not recommended, and these Users and their Proposal will be disregarded.
Unreasonable Price Proposals will not be considered.
The Project is Time Sensitive, and 7-10 Days is the maximum Work Time.
After Completion, The Project will be sent to PCBWAY or JLCPCB or alternative manufacturer for the PCB’s to be Manufactured.