Wearable Dildo Crown STL Design
Budget: $30 – $250 USD
I need a clean, print-ready 3-D model of a crown whose spires are stylised dildos, each about size 7, arranged in a balanced, royal and elegant silhouette. The look should be simple and smooth as selected—rounded contours, no intricate engraving—so it prints reliably on an FDM printer with a 0.4 mm nozzle.
Practical details
• Inner diameter: roughly 190 mm to fit an average adult head, with gentle flex tolerance.
• Wall thickness: minimum 2 mm to suit PLA, ABS, or PETG.
• Print orientation: optimise for upright printing with minimal support; build-in only what is strictly necessary.
• Mesh integrity: watertight, correctly oriented, no non-manifold edges or inverted normals.
Deliverable
• One zipped folder containing the final STD/STL file plus a quick viewport render that shows scale.
I will run the file through Netfabb and a slicer; one revision round is included if any issues appear. Once it passes those checks, the project is complete.
Practical details
• Inner diameter: roughly 190 mm to fit an average adult head, with gentle flex tolerance.
• Wall thickness: minimum 2 mm to suit PLA, ABS, or PETG.
• Print orientation: optimise for upright printing with minimal support; build-in only what is strictly necessary.
• Mesh integrity: watertight, correctly oriented, no non-manifold edges or inverted normals.
Deliverable
• One zipped folder containing the final STD/STL file plus a quick viewport render that shows scale.
I will run the file through Netfabb and a slicer; one revision round is included if any issues appear. Once it passes those checks, the project is complete.