SUV Interior & Exterior 3D Models
Budget: ₹1,500 – ₹12,500 INR
I’m preparing a 3 D-printable showcase model of an SUV and need both the full exterior shell and the core interior components produced at a moderate level of detail. The exterior should capture the overall body lines, window recesses, wheel arches and basic under-tray geometry so the finished print reads instantly as an SUV even before painting.
Inside, I only require the dashboard, front and rear seats, and the steering wheel. Keep small textures such as stitching or screen graphics simplified so they survive slicing, but do preserve the main shapes, bevels and control surfaces a hobbyist would expect to see at 1:10–1:18 scale. Parts should be separated logically (body, chassis, dash, individual seats, wheel) with clean, manifold geometry and watertight shells ready for direct export to the slicer.
Deliverables
• Print-ready STL (preferred) or OBJ for each part
• A parent assembly file (STEP or Blender) showing correct placement and clear naming
• Brief read-me noting scale, orientation suggestions and any recommended supports
Acceptance criteria
1. All meshes pass common print checks (no non-manifold edges, flipped normals or holes).
2. Exterior and interior components align perfectly when assembled.
3. File sizes remain manageable; decimation only where it does not affect visible quality.
I work in Cura and PrusaSlicer, so please keep wall thicknesses and tolerances suitable for standard FDM printers. If you create the models in Fusion 360, SolidWorks, Blender, or a comparable package, that’s fine—just include the native file so I can tweak minor details later if needed.
Looking forward to a clean, print-ready SUV model I can drop straight into my slicer and start producing.
Inside, I only require the dashboard, front and rear seats, and the steering wheel. Keep small textures such as stitching or screen graphics simplified so they survive slicing, but do preserve the main shapes, bevels and control surfaces a hobbyist would expect to see at 1:10–1:18 scale. Parts should be separated logically (body, chassis, dash, individual seats, wheel) with clean, manifold geometry and watertight shells ready for direct export to the slicer.
Deliverables
• Print-ready STL (preferred) or OBJ for each part
• A parent assembly file (STEP or Blender) showing correct placement and clear naming
• Brief read-me noting scale, orientation suggestions and any recommended supports
Acceptance criteria
1. All meshes pass common print checks (no non-manifold edges, flipped normals or holes).
2. Exterior and interior components align perfectly when assembled.
3. File sizes remain manageable; decimation only where it does not affect visible quality.
I work in Cura and PrusaSlicer, so please keep wall thicknesses and tolerances suitable for standard FDM printers. If you create the models in Fusion 360, SolidWorks, Blender, or a comparable package, that’s fine—just include the native file so I can tweak minor details later if needed.
Looking forward to a clean, print-ready SUV model I can drop straight into my slicer and start producing.