Optimize & Repair Low-Poly Bull 3D Print
Budget: $30 – $250 CAD
Technical Fix & Optimization of Low-Poly Bull for 3D Printing
Project Description:
I am looking for a 3D designer with specific experience in FDM 3D printing to fix and optimize an AI-generated low-poly model. The current mesh has geometry issues that cause consistent print failures in the chest/belly area (see attached photos).
Scope of Work:
Overhang/Bridge Fix: Redesign the chest geometry so it prints successfully without excessive sagging or spaghetti. The current "bridge" is too aggressive for standard FDM settings.
Anatomical Clean-up: Remove the protrusion/protuberance between the back legs. The underside should be clean and aesthetically consistent with the rest of the model.
Mesh Refinement: The polygons on the belly are currently too large/irregular. I need these subdivided/refined into smaller polygons to ensure a smoother print surface while maintaining the overall low-poly "faceted" style of the bull.
Print Readiness: Ensure the model is 100% manifold (watertight) with no flipped normals or internal geometry.
Deliverables:
One (1) optimized .STL file. (I only accept STL format for the final delivery).
Requirements for Bidders:
Please mention what 3D printing software or hardware you use.
You must understand how to optimize a mesh for gravity/overhangs without relying solely on slicer-generated supports.
The final model must be ready to drop into a slicer (like Bambu Studio or Cura) and print successfully.
Project Description:
I am looking for a 3D designer with specific experience in FDM 3D printing to fix and optimize an AI-generated low-poly model. The current mesh has geometry issues that cause consistent print failures in the chest/belly area (see attached photos).
Scope of Work:
Overhang/Bridge Fix: Redesign the chest geometry so it prints successfully without excessive sagging or spaghetti. The current "bridge" is too aggressive for standard FDM settings.
Anatomical Clean-up: Remove the protrusion/protuberance between the back legs. The underside should be clean and aesthetically consistent with the rest of the model.
Mesh Refinement: The polygons on the belly are currently too large/irregular. I need these subdivided/refined into smaller polygons to ensure a smoother print surface while maintaining the overall low-poly "faceted" style of the bull.
Print Readiness: Ensure the model is 100% manifold (watertight) with no flipped normals or internal geometry.
Deliverables:
One (1) optimized .STL file. (I only accept STL format for the final delivery).
Requirements for Bidders:
Please mention what 3D printing software or hardware you use.
You must understand how to optimize a mesh for gravity/overhangs without relying solely on slicer-generated supports.
The final model must be ready to drop into a slicer (like Bambu Studio or Cura) and print successfully.