Create 3D model (3d modelling + photogrammetry)
Budget: $250 – $750 NZD
Must have ace 3d modelling skills plus photogrammetry experience.
Create a 3d model with photogrammetry using attached images.
Use 3D modelling to:
- Render over wood tears, rips and holes
- replace the solid rectangle at the bottom of the carving and replace with the words KIA KAHA as per the attached images (following the blue/black lines) bonus points if you can make it looked carved i.e. like the carving indents on the main piece.
- replace the current carved figure with an equivalent sized woman, arms outstretched same as the current figure,
she is wearing a cloak with a hood, you can see her face from underneath the hood and she looks determined. The cloak cover most of her arms, the cloak hugs her body down to her feet. The pose is determined hanging onto the rest of the sculpture. I don't want Jesus on the cross or abu dhabi vibes. Again bonus points if you can make it looked carved i.e. like the carving indents on the main piece.
- create four bolts/cylinders at the back. These don't need to look carved. These will be used to hang the piece. Sticking out 10cm from the piece. 16mm OD, with a 5mm hole in the centre.
Model must be 175cm long / proportionate.
Model must be one 3d object, able to be 3D printed without any issue's i.e. no mesh holes.
Model must be delivered in STL file format ready for 3D printing.
All photo images will be supplied to the winning bid.
Create a 3d model with photogrammetry using attached images.
Use 3D modelling to:
- Render over wood tears, rips and holes
- replace the solid rectangle at the bottom of the carving and replace with the words KIA KAHA as per the attached images (following the blue/black lines) bonus points if you can make it looked carved i.e. like the carving indents on the main piece.
- replace the current carved figure with an equivalent sized woman, arms outstretched same as the current figure,
she is wearing a cloak with a hood, you can see her face from underneath the hood and she looks determined. The cloak cover most of her arms, the cloak hugs her body down to her feet. The pose is determined hanging onto the rest of the sculpture. I don't want Jesus on the cross or abu dhabi vibes. Again bonus points if you can make it looked carved i.e. like the carving indents on the main piece.
- create four bolts/cylinders at the back. These don't need to look carved. These will be used to hang the piece. Sticking out 10cm from the piece. 16mm OD, with a 5mm hole in the centre.
Model must be 175cm long / proportionate.
Model must be one 3d object, able to be 3D printed without any issue's i.e. no mesh holes.
Model must be delivered in STL file format ready for 3D printing.
All photo images will be supplied to the winning bid.