I need a fusion 360 professional designer to make a co2 dragster
Budget: $10 – $30 AUD
Please make me a unique but aerodynamic design co2 dragster car that follows the design specifications in autodesk fusion 360.
PRODUCTION SPECIFICATIONS (a document with all these are attached below)
MIN
MAX
Finished
mm / g
Dragster Body
A.
Dragster body length
200 mm
305 mm
B.
Dragster body height at rear with wheels
75 mm
C.
Dragster body mass / weight with wheels
45 g
170 g
D/r.
Dragster body width at axles – front & back (Rail Type) all wheels are outside the body 35mm - 42mm external measurement.
35 mm
42 mm
D/s.
Dragster body width at axles – front & back (Shell Type) all wheels are inside the body 35mm - 42mm internal measurement with a minimum 3mm wall thickness each side.
35 mm
42 mm
E.
Dragster Body width (including wheels)
90 mm
Axles / Axle Holes / Wheelbase
F.
Number of axles
2
2
G.
Bottom of axle hole above bottom of dragster
5 mm
10 mm
H.
Rear axle hole from rear of dragster
9 mm
100 mm
I.
Wheelbase
105 mm
270 mm
Spacers / Washers / Clips
J.
Spacer washers
8
K.
Axle clips or similar
8
Power Plant (CO 2 Cartridge Hole)
L.
Power plant: depth of hole
50 mm
52 mm
M.
Power plant: housing thickness (around entire housing)
3 mm
N.
Power plant: housing (diameter) Please use a Forstner bit for best results.
18.80 mm
3/4"
O.
Power plant: lowest point of chamber diameter to race surface with wheels
26 mm
36 mm
Screw Eyes
P.
Screw eye or eyelet inside diameter
4 mm
8 mm
Q.
Screw eyes (2) distance apart at farthest point
155 mm
270 mm
Wheels
R.
Wheels: front diameter
32 mm
37 mm
S.
Wheels: front width at surface contact point
2 mm
5 mm
T.
Wheels: rear diameter
30 mm
40 mm
U.
Wheels: rear at surface contact point
15 mm
18 mm
OUTLAW CLASS
PRODUCTION SPECIFICATIONS
MIN
MAX
PASSED
Dragster Body
A.
Dragster body length
305 mm
B.
Dragster body mass / weight with wheels
45 g
C.
Power plant: depth of hole
50 mm
52 mm
D.
Power plant: housing thickness (around entire housing)
3 mm
E.
Power plant: housing (diameter) Please use a Forstner bit for best results.
18.80 mm
3/4"
F.
Power plant: lowest point of chamber diameter to race surface with wheels
26 mm
36 mm
G.
Screw eye or eyelet inside diameter
4 mm
PRODUCTION SPECIFICATIONS (a document with all these are attached below)
MIN
MAX
Finished
mm / g
Dragster Body
A.
Dragster body length
200 mm
305 mm
B.
Dragster body height at rear with wheels
75 mm
C.
Dragster body mass / weight with wheels
45 g
170 g
D/r.
Dragster body width at axles – front & back (Rail Type) all wheels are outside the body 35mm - 42mm external measurement.
35 mm
42 mm
D/s.
Dragster body width at axles – front & back (Shell Type) all wheels are inside the body 35mm - 42mm internal measurement with a minimum 3mm wall thickness each side.
35 mm
42 mm
E.
Dragster Body width (including wheels)
90 mm
Axles / Axle Holes / Wheelbase
F.
Number of axles
2
2
G.
Bottom of axle hole above bottom of dragster
5 mm
10 mm
H.
Rear axle hole from rear of dragster
9 mm
100 mm
I.
Wheelbase
105 mm
270 mm
Spacers / Washers / Clips
J.
Spacer washers
8
K.
Axle clips or similar
8
Power Plant (CO 2 Cartridge Hole)
L.
Power plant: depth of hole
50 mm
52 mm
M.
Power plant: housing thickness (around entire housing)
3 mm
N.
Power plant: housing (diameter) Please use a Forstner bit for best results.
18.80 mm
3/4"
O.
Power plant: lowest point of chamber diameter to race surface with wheels
26 mm
36 mm
Screw Eyes
P.
Screw eye or eyelet inside diameter
4 mm
8 mm
Q.
Screw eyes (2) distance apart at farthest point
155 mm
270 mm
Wheels
R.
Wheels: front diameter
32 mm
37 mm
S.
Wheels: front width at surface contact point
2 mm
5 mm
T.
Wheels: rear diameter
30 mm
40 mm
U.
Wheels: rear at surface contact point
15 mm
18 mm
OUTLAW CLASS
PRODUCTION SPECIFICATIONS
MIN
MAX
PASSED
Dragster Body
A.
Dragster body length
305 mm
B.
Dragster body mass / weight with wheels
45 g
C.
Power plant: depth of hole
50 mm
52 mm
D.
Power plant: housing thickness (around entire housing)
3 mm
E.
Power plant: housing (diameter) Please use a Forstner bit for best results.
18.80 mm
3/4"
F.
Power plant: lowest point of chamber diameter to race surface with wheels
26 mm
36 mm
G.
Screw eye or eyelet inside diameter
4 mm
Related categories:
Engineering
3D Rendering
Aeronautical Engineering
3D Modelling
Autodesk Fusion 360