3d model for card holder
Budget: $30 – $250 USD
I am looking for a skilled person to assist me in developing a 3D model approximate size of 50 mm x 50 mm
basic shape similar to a matchbook (for view, the flap that opens would be the face)
it will be hollow with 2mm walls, a point to put a 2mm pin inside. a slot on the bottom to slide a piece of cardboard in and can will hold in place with gripped jaws (pin is the pivot point), and springs on the top part inside to keep pressure of jaws closed. it will be 2 pieces that lock together (and will not easily come apart, thinking points on the face that will go into holes on, the base locking the 2 pieces together)
initial design will be printed, we will evaulate, then post new project to modify for enhancements.
attached are my thoughts
basic shape similar to a matchbook (for view, the flap that opens would be the face)
it will be hollow with 2mm walls, a point to put a 2mm pin inside. a slot on the bottom to slide a piece of cardboard in and can will hold in place with gripped jaws (pin is the pivot point), and springs on the top part inside to keep pressure of jaws closed. it will be 2 pieces that lock together (and will not easily come apart, thinking points on the face that will go into holes on, the base locking the 2 pieces together)
initial design will be printed, we will evaulate, then post new project to modify for enhancements.
attached are my thoughts