3D knot Ring
Budget: $30 – $250 USD
I want to print a mold that I can use to make a knot ring out of metal clay. The mold needs to be 12mm thick and 30mm wide 100mm long.
Once the clay has been pushed into the mold it is taken out and formed into a ring shape on a ring mandrel and dried. The ring will be flat on the inside and rounded on the outside. The “wire” of the ring should be 1.5 mm wide and 1.5 mm high. The round outside of the ring should be down into the mold and the flat inside of the mold should be level with the top of the mold
Once the clay has been pushed into the mold it is taken out and formed into a ring shape on a ring mandrel and dried. The ring will be flat on the inside and rounded on the outside. The “wire” of the ring should be 1.5 mm wide and 1.5 mm high. The round outside of the ring should be down into the mold and the flat inside of the mold should be level with the top of the mold