creation of a 3d design of a smart cap
Budget: $30 – $250 USD
I'm looking for talented freelancers to create a 3D design of a smart cap. This design will be used for product design and 3D printing so it needs to show a medium level of detail. Specifically, it needs to represent an appliance. Be sure to provide a highly creative design that will be eye-catching and attractive. The project could require multiple revisions before the final design is accepted. Therefore, excellent communication skills and the ability to take instructions and feedback from me are a must. If this project is of interest to you, please apply!
Here is what i want more specifically :
I need a 3D model for our prototype.
The files supplied must allow 3D printing.
The product is a simple cap used to close classic 20L cans to which we will add accessories:
1) A sensor:
This must point towards the liquid. The files are supplied with their descriptions and the possibility of extracting a 3D view. The sensor will be connected with 4 wires to the processor.
2) A processor:
the board size is +- 35 mm by 35mm (a file is available with the exact measurements which also allows 3D export. As you will see, the board is equipped with a USB port. Users should be able to plug in a USB cable to recharge the battery.
3) An ssd1306 screen:
A file giving the dimensions is available. The screen will be on top of the cap. The screen will be connected to the processor with 4 wires.
4) A terminal block to connect 2 wires to the cap should be available. (the terminal is connected to the board with 2 wire)
5) A 3.7V 300Mah mini battery.
This battery is connected to the board via the connector. The dimensions are 30X20X6mm. A 3d model is attached but the size may need to be adapted as it is a 500ma.
6) A (small) button accessible by the user (also connected to the board with 2 wires
I would like to obtain a 3d assembled view and also an exploded view. It must be possible to insert the elements in the cap after the 3d printing.
Here is what i want more specifically :
I need a 3D model for our prototype.
The files supplied must allow 3D printing.
The product is a simple cap used to close classic 20L cans to which we will add accessories:
1) A sensor:
This must point towards the liquid. The files are supplied with their descriptions and the possibility of extracting a 3D view. The sensor will be connected with 4 wires to the processor.
2) A processor:
the board size is +- 35 mm by 35mm (a file is available with the exact measurements which also allows 3D export. As you will see, the board is equipped with a USB port. Users should be able to plug in a USB cable to recharge the battery.
3) An ssd1306 screen:
A file giving the dimensions is available. The screen will be on top of the cap. The screen will be connected to the processor with 4 wires.
4) A terminal block to connect 2 wires to the cap should be available. (the terminal is connected to the board with 2 wire)
5) A 3.7V 300Mah mini battery.
This battery is connected to the board via the connector. The dimensions are 30X20X6mm. A 3d model is attached but the size may need to be adapted as it is a 500ma.
6) A (small) button accessible by the user (also connected to the board with 2 wires
I would like to obtain a 3d assembled view and also an exploded view. It must be possible to insert the elements in the cap after the 3d printing.