Solar-Ready Industrial Shed Structural Design -- 2
Budget: ₹12,500 – ₹37,500 INR
Request for Quotation (RFQ) – Structural Design & Engineering Consultancy
Project: 40,000 Sq. Ft. Solar-Ready PEB Industrial Shed
Scope: Structural Design, Proof Checking, and Technical Supervision
1. Project Parameters
* Building Dimensions: 80\text{m} \times 50\text{m} (Clear Span).
* Eaves Height: 8.0 Meters.
* Location: [Insert City/State] – Crucial for Wind Speed & Seismic Zone calculations.
* Special Requirement: Provision for Roof-mounted Solar PV System (min. 20\text{kg/m}^2 dead load).
2. Consultant’s Scope of Work
The consultant will be responsible for the following deliverables:
* Structural Analysis: Complete 3D modeling and stress analysis using STAAD.Pro or MBS.
* Detailed Drawings: * General Arrangement (GA) Drawings.
* Foundation & Pedestal Design (to be coordinated with the civil contractor).
* Anchor Bolt Plans and Connection Details.
* Shop/Fabrication Drawings (BOM - Bill of Materials).
* Optimization: Ensuring the steel design meets IS 800:2007 (or relevant US codes) while maintaining cost-effectiveness.
* Proof Checking: Coordination with a third-party auditor for structural vetting.
* Technical Specs: Preparation of the Painting Schedule (3-coat PU system) and Sheeting specifications.
3. Technical Compliance Requirements
The design must strictly adhere to:
* Dead Loads: Inclusion of Solar Panel weight + purlins + sheeting.
* Wind Loads: As per IS 875 (Part 3) based on the specific terrain category of the site.
* Deflection Criteria: Vertical and horizontal deflection limits must be within L/180 to L/240 for the 50m span.
4. Submission Guidelines
Please provide your proposal including:
* Professional Fee: Lump-sum fee for the complete design cycle.
* Timeline: Days required for (a) Preliminary GA and (b) Final Construction Drawings.
* Portfolio: List of at least 3 previous projects featuring clear spans of 40m or more.
* Software: List of licensed software to be used for the analysis.
Project: 40,000 Sq. Ft. Solar-Ready PEB Industrial Shed
Scope: Structural Design, Proof Checking, and Technical Supervision
1. Project Parameters
* Building Dimensions: 80\text{m} \times 50\text{m} (Clear Span).
* Eaves Height: 8.0 Meters.
* Location: [Insert City/State] – Crucial for Wind Speed & Seismic Zone calculations.
* Special Requirement: Provision for Roof-mounted Solar PV System (min. 20\text{kg/m}^2 dead load).
2. Consultant’s Scope of Work
The consultant will be responsible for the following deliverables:
* Structural Analysis: Complete 3D modeling and stress analysis using STAAD.Pro or MBS.
* Detailed Drawings: * General Arrangement (GA) Drawings.
* Foundation & Pedestal Design (to be coordinated with the civil contractor).
* Anchor Bolt Plans and Connection Details.
* Shop/Fabrication Drawings (BOM - Bill of Materials).
* Optimization: Ensuring the steel design meets IS 800:2007 (or relevant US codes) while maintaining cost-effectiveness.
* Proof Checking: Coordination with a third-party auditor for structural vetting.
* Technical Specs: Preparation of the Painting Schedule (3-coat PU system) and Sheeting specifications.
3. Technical Compliance Requirements
The design must strictly adhere to:
* Dead Loads: Inclusion of Solar Panel weight + purlins + sheeting.
* Wind Loads: As per IS 875 (Part 3) based on the specific terrain category of the site.
* Deflection Criteria: Vertical and horizontal deflection limits must be within L/180 to L/240 for the 50m span.
4. Submission Guidelines
Please provide your proposal including:
* Professional Fee: Lump-sum fee for the complete design cycle.
* Timeline: Days required for (a) Preliminary GA and (b) Final Construction Drawings.
* Portfolio: List of at least 3 previous projects featuring clear spans of 40m or more.
* Software: List of licensed software to be used for the analysis.