Slice this revit floor model into floors so it can be 3d printed
Budget: $30 – $250 USD
I have a revit model of a house (four floor). I am going to want to 3d print each floor by itself. So you will need to slice the model by floor. The cieling of the previous floor should be the base of the next floor, so that you can look into the house from on top.
You will also need to modify the model a bit, so that there are pegs/holes so each floor can snap into the floor below it.
The fourth floor is the attic, if its too hard to separate that from the roof, it can be left as one, so there will be 3 separate prints.
Please mention the word "cat" so I know you read all the details.
Thank you
You will also need to modify the model a bit, so that there are pegs/holes so each floor can snap into the floor below it.
The fourth floor is the attic, if its too hard to separate that from the roof, it can be left as one, so there will be 3 separate prints.
Please mention the word "cat" so I know you read all the details.
Thank you