3D Scan part of a North American Ford Ranger (Current model)
Budget: $250 – $750 AUD
Our Australian based business has an opportunity to sell a product to the USA but before we do, we need to know that our product will fit.
We are looking for someone that can 3D scan a small section of the bed on a current model Ford Ranger. You will either need to own the vehicle yourself or visit a Ford dealership to do this work.
The scan should cover the area shown in the attached photo.
The job must be from actual 3D scan data, NOT some off-the-shelf model on hum3D or other CAD model database.
The scan must be dimensionally correct so you will probably use an Artec, Creaform or similar scanner - This is probably not suitable for photogrammetry.
The file should be provided to us as an STL
We are looking for someone that can 3D scan a small section of the bed on a current model Ford Ranger. You will either need to own the vehicle yourself or visit a Ford dealership to do this work.
The scan should cover the area shown in the attached photo.
The job must be from actual 3D scan data, NOT some off-the-shelf model on hum3D or other CAD model database.
The scan must be dimensionally correct so you will probably use an Artec, Creaform or similar scanner - This is probably not suitable for photogrammetry.
The file should be provided to us as an STL