Repair 3D-Model for 3D-Printing ASAP
Budget: €8 – €30 EUR
Hello,
due to an urgent staff shortage, we need help in preparing a 3D model for 3D printing.
We need our 3D model of a building with the following corrections prepared for 3D printing with Ultimaker Cura in the next two hours:
- Removal of the fence on the wall around the building.
- Sufficient thickness of all layers of at least 1.2mm
- All windows to be open and the doors to be closed
The model should then be printed in approx. 10cmx10cm.
The model must not look weird in Cura.
Please use the preview function for this to check if the print would work cleanly.
You'll get a .fbx. We need a .stl at the end.
The task must be finished asap, by 18:30 German time at the latest.
due to an urgent staff shortage, we need help in preparing a 3D model for 3D printing.
We need our 3D model of a building with the following corrections prepared for 3D printing with Ultimaker Cura in the next two hours:
- Removal of the fence on the wall around the building.
- Sufficient thickness of all layers of at least 1.2mm
- All windows to be open and the doors to be closed
The model should then be printed in approx. 10cmx10cm.
The model must not look weird in Cura.
Please use the preview function for this to check if the print would work cleanly.
You'll get a .fbx. We need a .stl at the end.
The task must be finished asap, by 18:30 German time at the latest.