Notre Dame (2 layouts in 3d for printing, gcode format cut into parts for printing) + source
Budget: €30 – €250 EUR
LAYOUT 1 (Notre Dame de Paris) facade tower height 500 mm (other dimensions are proportional):
- the whole building, for printing. Work from all sides.
- Mounting holes on the base (reinforced with internal stiffeners) for attaching to an exhibition stand
LAYOUT 2 (Notre Dame Cathedral) height 1200 mm, depth 180 mm (other dimensions are proportional):
- only a direct view of the facade with the study of the side parts
- will be attached to a vertical plane. Mounting holes (reinforced with internal stiffeners) are required at the base of the backrest for attachment to the exhibition stand. At least 6 pieces
NOTES:
- joints, if possible, choose places for joints that are less noticeable in the future (the size of printed elements can be varied by joints)
- internal reinforcement, taking into account possible touches and external factors (different layouts have different requirements
- in connection with the subsequent installation of models on the sides of the assembly, there must be matching designations (unique only for the sides of the contact)
- mounting planes must contain docking connectors (I want to avoid gluing in case of replacing some parts. This item is being discussed.
- visual development:
1. For high-quality perception (on a given scale)
2. Accounting for possible (periodic) contact with the hands of people with vision problems (working out the reinforcement (on the reverse side) of thin elements)
- layouts are provided with the subsequent possibility of modifying and editing them in the source
- as well as cut for printing on a Prusa printer (MK3S+) with a print area of 25×21×21 cm (9,84"×8,3"×8,3")
- the whole building, for printing. Work from all sides.
- Mounting holes on the base (reinforced with internal stiffeners) for attaching to an exhibition stand
LAYOUT 2 (Notre Dame Cathedral) height 1200 mm, depth 180 mm (other dimensions are proportional):
- only a direct view of the facade with the study of the side parts
- will be attached to a vertical plane. Mounting holes (reinforced with internal stiffeners) are required at the base of the backrest for attachment to the exhibition stand. At least 6 pieces
NOTES:
- joints, if possible, choose places for joints that are less noticeable in the future (the size of printed elements can be varied by joints)
- internal reinforcement, taking into account possible touches and external factors (different layouts have different requirements
- in connection with the subsequent installation of models on the sides of the assembly, there must be matching designations (unique only for the sides of the contact)
- mounting planes must contain docking connectors (I want to avoid gluing in case of replacing some parts. This item is being discussed.
- visual development:
1. For high-quality perception (on a given scale)
2. Accounting for possible (periodic) contact with the hands of people with vision problems (working out the reinforcement (on the reverse side) of thin elements)
- layouts are provided with the subsequent possibility of modifying and editing them in the source
- as well as cut for printing on a Prusa printer (MK3S+) with a print area of 25×21×21 cm (9,84"×8,3"×8,3")