New 3d version of existing 3d cap drawing

Hi there! I wish to have 3 versions of my existing 3d cap with the following details:

Video: https://youtu.be/2v_ttAzuk8g

Drawing 1 (v3.3)
- Each inner teeth (there are 3) of the cap must have 1.6mm thickness (as opposed to current 0.7mm)
- Teeth should have a base thickness of 1.9mm and reach 1.6mm at the top, making the base more solid than the top
- You should start increasing from the inside out
- Also mark the version number on the top surface of the cap

Drawing 2 (v4)
- Based on Drawing 1 you should remove 2 teeth and keep only 1 there
- Also mark the version number on the top surface of the cap

Drawing 3 (v5)
- Remove all 3 teeth
- Add cutter in place of teeth
- Extent height of cutter to 18.4mm height
- 3.2mm and 5mm (varying between each other) below the top add 4mm diameter circle windows throughout the whole cutter (as many as can fit)
- Space them 5mm distance
- Also mark the version number on the top surface of the cap