Minor changes to existing design- electronic enclosure
Budget: €30 – €250 EUR
We need to apply some changes mainly making the plastic thicker in some areas.
As shown below, the wall thickness of the indicated red areas are very thin, which has a high risk of deformation, crack and damage during 3D printing process.
We need to increase the partial wall thickness to get a better print effect (possibly up to 1.5 mm).
The air quality top and bottom parts must match. Attached also a rendering of the complete assembly. The models are available in solidworks format.
As shown below, the wall thickness of the indicated red areas are very thin, which has a high risk of deformation, crack and damage during 3D printing process.
We need to increase the partial wall thickness to get a better print effect (possibly up to 1.5 mm).
The air quality top and bottom parts must match. Attached also a rendering of the complete assembly. The models are available in solidworks format.