Japandi Duplex architectural design + 3D Australia
Budget: $30 – $250 AUD
The project is to design and prepare a full set of architectural drawings and documentation for a single story duplex residential development suitable for submission under the NSW CDC (Complying Development Certificate) process.
This is a single story duplex, each unit to be 4 bedroom, 2 bath, 1 garage. Each unit approx. 200sqm but will be dependent on balance between design and cost.
Looking for a minimalist, japandi design utilising natural materials and tones.
Required Architectural Drawings & Documentation
The scope will include, but is not limited to:
1. Site Analysis & Planning
• Site Plan showing boundaries, setbacks, existing features, north point, and levels.
• Site Coverage & Landscaping Calculations in line with CDC requirements.
2. Architectural Design & Plans
•Floor Plan – including all dimensions, room labels, fixtures, and circulation.
• Roof Plan – roof form, pitches
3. Elevations & Sections
• Four (4) External Elevations showing materials, heights, setbacks, and openings.
• At least two Building Sections to demonstrate compliance with floor-to-ceiling heights, roof heights, and relationship to natural ground.
I also wish to have a 3D model to visualise the design ready to create renders.
Upon award of the project, I can provide the survey plan of the site, high level facade concept, as well as further design inputs and parameters like set backs, no. Bedrooms etc.
Thanks,
Les
This is a single story duplex, each unit to be 4 bedroom, 2 bath, 1 garage. Each unit approx. 200sqm but will be dependent on balance between design and cost.
Looking for a minimalist, japandi design utilising natural materials and tones.
Required Architectural Drawings & Documentation
The scope will include, but is not limited to:
1. Site Analysis & Planning
• Site Plan showing boundaries, setbacks, existing features, north point, and levels.
• Site Coverage & Landscaping Calculations in line with CDC requirements.
2. Architectural Design & Plans
•Floor Plan – including all dimensions, room labels, fixtures, and circulation.
• Roof Plan – roof form, pitches
3. Elevations & Sections
• Four (4) External Elevations showing materials, heights, setbacks, and openings.
• At least two Building Sections to demonstrate compliance with floor-to-ceiling heights, roof heights, and relationship to natural ground.
I also wish to have a 3D model to visualise the design ready to create renders.
Upon award of the project, I can provide the survey plan of the site, high level facade concept, as well as further design inputs and parameters like set backs, no. Bedrooms etc.
Thanks,
Les