JPG to 3D Print-ready STL Conversion
Budget: $30 – $250 USD
I need a professional to convert a JPG file into a 3D printing-ready STL file. The object is a hollow cube measuring 7x7x7 cm, designed to accommodate foam for microphone support.
Key Specifications:
- Hollow Cube: The design must be a hollow cube with sufficient internal space to fit foam that will cradle a microphone.
- Dimensions: The external dimensions of the cube are 7x7x7 cm.
- Wall Thickness: The wall of the cube needs to be 5 mm thick.
- 3D File Format: The final output must be a STL file.
- Surface Finish: The 3D printed part should have a smooth surface finish.
Ideal candidates for this project should have:
- Proficiency in 3D modeling software and STL file creation.
- Experience with designing for 3D printing.
- Ability to ensure the wall thickness and surface finish meet specifications.
- Good communication skills for clarifying any uncertainties.
Key Specifications:
- Hollow Cube: The design must be a hollow cube with sufficient internal space to fit foam that will cradle a microphone.
- Dimensions: The external dimensions of the cube are 7x7x7 cm.
- Wall Thickness: The wall of the cube needs to be 5 mm thick.
- 3D File Format: The final output must be a STL file.
- Surface Finish: The 3D printed part should have a smooth surface finish.
Ideal candidates for this project should have:
- Proficiency in 3D modeling software and STL file creation.
- Experience with designing for 3D printing.
- Ability to ensure the wall thickness and surface finish meet specifications.
- Good communication skills for clarifying any uncertainties.