4 Impression Mold for Housing Clip
Budget: €30 – €250 EUR
Hi, I require a 4 impression mould designed for a housing clip.
The housing clip is attached to this post.
Mould design requires cams, ejector pins, cooling channels, sprues, etc.
There will be an image uploaded as well as the part which shows how the cam will work.
The image shows the mould in the open and closed position, the cam is closing the mould before injection.
The part is upside down on the image sketch and will be required to be upside down in the mould.
One or 2 ejector pins will be used to eject the part from the bottom which is also shown in image.
Required in 5 days.
The most qualified designer gets the job.
Thanks
The housing clip is attached to this post.
Mould design requires cams, ejector pins, cooling channels, sprues, etc.
There will be an image uploaded as well as the part which shows how the cam will work.
The image shows the mould in the open and closed position, the cam is closing the mould before injection.
The part is upside down on the image sketch and will be required to be upside down in the mould.
One or 2 ejector pins will be used to eject the part from the bottom which is also shown in image.
Required in 5 days.
The most qualified designer gets the job.
Thanks