IIT/NIT Approved Tensile Canopy Drawings
Budget: ₹1,500 – ₹12,500 INR
I need a complete set of structural drawings and calculations for a commercial-grade tensile canopy in steel. The package must be robust enough to obtain formal vetting and approval from an IIT or NIT reviewer, so every detail—load assessment, member sizing, connection design, and code references—has to be airtight.
Here is what I will supply: the site layout, basic canopy geometry, and intended load data. From you I expect:
• Structural analysis files (STAAD, SAP2000, or equivalent) referencing IS 800, IS 875, and any other relevant Indian standards.
• Fabrication and GA drawings in DWG and PDF, clearly dimensioned and ready for workshop use.
• A bill of materials with the final cumulative steel weight broken down by member type.
• Connection details, base-plate settings, and anchor bolt schedules.
• A concise design report that an IIT/NIT engineer can stamp without further clarification.
Accuracy, clarity, and code compliance are critical; the submission should pass academic scrutiny on the first review cycle. If you’ve previously delivered tensile shade structures that went through institutional approval, that experience will be a big plus.
3D layout and plan area is attached herewith. Height of vertical poles is 20ft and total height of centre is 30ft ..
Here is what I will supply: the site layout, basic canopy geometry, and intended load data. From you I expect:
• Structural analysis files (STAAD, SAP2000, or equivalent) referencing IS 800, IS 875, and any other relevant Indian standards.
• Fabrication and GA drawings in DWG and PDF, clearly dimensioned and ready for workshop use.
• A bill of materials with the final cumulative steel weight broken down by member type.
• Connection details, base-plate settings, and anchor bolt schedules.
• A concise design report that an IIT/NIT engineer can stamp without further clarification.
Accuracy, clarity, and code compliance are critical; the submission should pass academic scrutiny on the first review cycle. If you’ve previously delivered tensile shade structures that went through institutional approval, that experience will be a big plus.
3D layout and plan area is attached herewith. Height of vertical poles is 20ft and total height of centre is 30ft ..