IEC-Compliant Lighting Layout
Budget: $25 – $50 USD
I need a basic electrical shop drawing for a 50'x80' hangar. The fire marshall requires the following:
Provide electrical shop drawings for interior lighting to include panel board schedule and
location, electrical classification, one line wiring diagram, feeder schedule, and meter location.
CODE: IBC 2701.1 Scope. The provisions of this chapter and NFPA 70 shall govern the design,
construction, erection and installation of the electrical components, appliances, equipment and
systems used in buildings and structures covered by this code.
I have attached a general outline for the shop drawing that shows lights, outlets, hangar door power, and panel. It will be a 200A single phase panel box and the meter will be on the outside of the building by the panel box.
I have also attached the building plan if needed.
Provide electrical shop drawings for interior lighting to include panel board schedule and
location, electrical classification, one line wiring diagram, feeder schedule, and meter location.
CODE: IBC 2701.1 Scope. The provisions of this chapter and NFPA 70 shall govern the design,
construction, erection and installation of the electrical components, appliances, equipment and
systems used in buildings and structures covered by this code.
I have attached a general outline for the shop drawing that shows lights, outlets, hangar door power, and panel. It will be a 200A single phase panel box and the meter will be on the outside of the building by the panel box.
I have also attached the building plan if needed.