FreeCAD Model: ESP32-S3 Board

I need an accurate 3 D model of Waveshare’s ESP32-S3-LCD-2.8C, built natively in FreeCAD. All the information you need is on the official wiki page (https://www.waveshare.com/wiki/ESP32-S3-LCD-2.8C); if you can’t extract what you need from there, this probably isn’t the right task for you.

The final part should reflect every critical physical feature called out on the wiki: overall board outline and thickness, LCD stack height, USB-C and JTAG connectors, 2×20 pin header, boot/reset buttons, side switches and any mounting holes shown. Work directly from the published dimensions, treating them as ±0.1 mm targets so the model can drop straight into an enclosure design.

Deliverables
• Native FreeCAD (.FCStd) file, clean tree structure (PCB, LCD, connectors, buttons, switches as separate bodies)
• STEP export for cross-package use

Acceptance criteria
• All dimensions, connector placement, button and switch locations match the wiki figures within ±0.1 mm
• Opens error-free in FreeCAD 0.21 or newer using only standard workbenches

That’s it—produce the file, and once the dimensions check out, the job is done.