Engineer new metal covers to replace plastic covers. 3D scans for reference.
Budget: €30 – €250 EUR
Engineer new (flat) metal covers (sheet metal) to replace plastic covers. 3D scans for reference.
The original shape does not need to be replicated. The plate must be flat and fitted to the original mounting points. Spacers between the plate and mounting points are required for this.
- In SW 2022 or older
- Make sure that the 3D drawings are built up properly from the centre of the planes and that all sketches are black and properly sized/formatted. So, no short cuts.
- Finally, the quality and structure of the drawing is importent, for adjustments and changes in dimensions that I want to introduce later in the 3D drawing You have made.
- The .stl file will be sent with dropbox.
The original shape does not need to be replicated. The plate must be flat and fitted to the original mounting points. Spacers between the plate and mounting points are required for this.
- In SW 2022 or older
- Make sure that the 3D drawings are built up properly from the centre of the planes and that all sketches are black and properly sized/formatted. So, no short cuts.
- Finally, the quality and structure of the drawing is importent, for adjustments and changes in dimensions that I want to introduce later in the 3D drawing You have made.
- The .stl file will be sent with dropbox.