Dragon Coin STL
Budget: $30 – $250 NZD
Single sided 2.5D releif for the front of a coin/good luck charm
Diamiter of the coin needs to be 35mm
Depth of the releif needs to be 2mm approx.
A 7mm hole in the middle.
File format can be an Artcam RLF or an STL.
My notes are in red on the image.
Client has a very limited budget on this one, its non profit and we need this ideally within a few days if possible.
Diamiter of the coin needs to be 35mm
Depth of the releif needs to be 2mm approx.
A 7mm hole in the middle.
File format can be an Artcam RLF or an STL.
My notes are in red on the image.
Client has a very limited budget on this one, its non profit and we need this ideally within a few days if possible.