Detailed 3D Roof Modeling & 2D Drawings
Budget: $20 – $60 USD
roof Plan is attached.
*required 3-D modeling for the roof including all the details mentioned below and also a video screen for the modeling process and steps (preferred using archicad or Tekla).
*Draw 2-D plan, and sections in selected areas.
#Description: design Roof Timber Frame, (no truss systems, just include the following:) (no calculations needed, just drawings)
On the drawing show:
-Rafters as axis lines
- Collar beams
-Posts
-Struts
- Purlins
-Wall Plates
Design the areas around chimneys and roof windows
Draw plan, and sections in selected areas
Add dimensions and descriptions of all structural elements
Roof Slope: 30 degrees
Note: I already modeled and drawn the rafter framing but I'm confused when it comes to the placement of the collar beams and some elements because the roof is hip-valley one with different arrangements so please pay attention.
the plan and dimension file: https://drive.google.com/file/d/1vtk1l55QPm2B_SIEKqTuNgrX20VUFBzA/view?usp=drive_link
please note this is the needed purlin system: https://drive.google.com/file/d/13izfPLKSEEBQACxsABq6Pw53eoB_Y6v2/view?usp=drive_link
a bit similar example (but not exactly the same, so please pay attention, it's just showing for the example the type of purlin used and the general idea):
Ex1: https://drive.google.com/file/d/1nkNJYFJn5yOQ8XVrFkRt19-Y45ioUr1T/view?usp=drive_link
Ex2: https://drive.google.com/file/d/1NuP7Of1Dm8TRFr1oIZ28rUer42EafY3x/view?usp=drive_link
please note: no truss systems (no king post truss, etc) the system only includes the elements described above
please if you’re not experienced don’t try, don’t search on youtube, google, etc. just to try because I already did this. It’s simple but need you to understand what is it exactly about
*required 3-D modeling for the roof including all the details mentioned below and also a video screen for the modeling process and steps (preferred using archicad or Tekla).
*Draw 2-D plan, and sections in selected areas.
#Description: design Roof Timber Frame, (no truss systems, just include the following:) (no calculations needed, just drawings)
On the drawing show:
-Rafters as axis lines
- Collar beams
-Posts
-Struts
- Purlins
-Wall Plates
Design the areas around chimneys and roof windows
Draw plan, and sections in selected areas
Add dimensions and descriptions of all structural elements
Roof Slope: 30 degrees
Note: I already modeled and drawn the rafter framing but I'm confused when it comes to the placement of the collar beams and some elements because the roof is hip-valley one with different arrangements so please pay attention.
the plan and dimension file: https://drive.google.com/file/d/1vtk1l55QPm2B_SIEKqTuNgrX20VUFBzA/view?usp=drive_link
please note this is the needed purlin system: https://drive.google.com/file/d/13izfPLKSEEBQACxsABq6Pw53eoB_Y6v2/view?usp=drive_link
a bit similar example (but not exactly the same, so please pay attention, it's just showing for the example the type of purlin used and the general idea):
Ex1: https://drive.google.com/file/d/1nkNJYFJn5yOQ8XVrFkRt19-Y45ioUr1T/view?usp=drive_link
Ex2: https://drive.google.com/file/d/1NuP7Of1Dm8TRFr1oIZ28rUer42EafY3x/view?usp=drive_link
please note: no truss systems (no king post truss, etc) the system only includes the elements described above
please if you’re not experienced don’t try, don’t search on youtube, google, etc. just to try because I already did this. It’s simple but need you to understand what is it exactly about