Custom 3D Pendant Design for Printing
Budget: $30 – $250 USD
Hi, I need a custom pendant modeled for 3D printing and mold-making (lost wax method). It should be a solid STL file, Cura-compatible, and ready to print — no hollowing, no split parts.
⸻
Pendant Specs:
• Final size: 150.9mm tall × 75.7mm wide
• Thickness: 6mm at the base, up to 12mm at raised details
• Shape: Street post-style pendant with all elements attached to one single central pole
⸻
Design Details:
• 3 stacked street signs on the pole:
• “WALL DR” (approx. 40mm wide × 8mm tall)
• “GLADIOLUS DR” (approx. 50mm wide × 8mm tall)
• “DEAD END” (approx. 30mm wide × 8mm tall)
• STOP sign (13mm wide octagon) attached to the same pole — no separate pole
• 2 sculpted surfboards (each 20mm tall, slightly curved, positioned near base)
• 1 sculpted palm tree (18mm tall trunk, 8mm crown width)
• Background includes shallow engraved concrete cracks (0.4–0.6mm wide, 0.3mm deep)
• Back of pendant must be flat and smooth for mold contact
⸻
Diamond Settings (Glue-In Only — No Prongs or Pavé):
All diamonds must use flat-bottom glue-in sockets, with a 0.1mm clearance on each side. Depths should be 1.3–1.5mm max.
Diamond Socket Layout:
• STOP sign letters (“STOP”)
• Stone size: 2.75mm
• Socket: 2.85mm square × 1.3mm deep
• Quantity: 4
• STOP sign background (if bust-down version)
• Stone size: 2.0mm
• Socket: 2.1mm square × 1.3mm deep
• Quantity: ~20
• Street sign letters
• Stone size: 2.0mm
• Socket: 2.1mm square × 1.3mm deep
• Quantity: ~24 total (based on lettering)
• Bail (diamond pyramid/tunnel-style)
• Front stones: 3.2mm → 3.3mm square × 1.5mm deep (4–6 stones)
• Side stones (optional): 2.0mm → 2.1mm square × 1.3mm deep (4–6 stones)
⸻
Bail Design:
• Bail should be pyramid-style, directly attached to the top of the pendant
• No letters or logos in the bail
• Chain passes through the inside of the bail like a tunnel
• Internal bail opening: 8mm wide × 6mm tall (to fit thick Miami Cuban link chain)
⸻
Final Deliverable:
• One STL file (solid, mold-printable, Cura-compatible)
• No hollowing, no moving parts
• Must be clean mesh, fully watertight, and ready for printing with high detail
⸻
Pendant Specs:
• Final size: 150.9mm tall × 75.7mm wide
• Thickness: 6mm at the base, up to 12mm at raised details
• Shape: Street post-style pendant with all elements attached to one single central pole
⸻
Design Details:
• 3 stacked street signs on the pole:
• “WALL DR” (approx. 40mm wide × 8mm tall)
• “GLADIOLUS DR” (approx. 50mm wide × 8mm tall)
• “DEAD END” (approx. 30mm wide × 8mm tall)
• STOP sign (13mm wide octagon) attached to the same pole — no separate pole
• 2 sculpted surfboards (each 20mm tall, slightly curved, positioned near base)
• 1 sculpted palm tree (18mm tall trunk, 8mm crown width)
• Background includes shallow engraved concrete cracks (0.4–0.6mm wide, 0.3mm deep)
• Back of pendant must be flat and smooth for mold contact
⸻
Diamond Settings (Glue-In Only — No Prongs or Pavé):
All diamonds must use flat-bottom glue-in sockets, with a 0.1mm clearance on each side. Depths should be 1.3–1.5mm max.
Diamond Socket Layout:
• STOP sign letters (“STOP”)
• Stone size: 2.75mm
• Socket: 2.85mm square × 1.3mm deep
• Quantity: 4
• STOP sign background (if bust-down version)
• Stone size: 2.0mm
• Socket: 2.1mm square × 1.3mm deep
• Quantity: ~20
• Street sign letters
• Stone size: 2.0mm
• Socket: 2.1mm square × 1.3mm deep
• Quantity: ~24 total (based on lettering)
• Bail (diamond pyramid/tunnel-style)
• Front stones: 3.2mm → 3.3mm square × 1.5mm deep (4–6 stones)
• Side stones (optional): 2.0mm → 2.1mm square × 1.3mm deep (4–6 stones)
⸻
Bail Design:
• Bail should be pyramid-style, directly attached to the top of the pendant
• No letters or logos in the bail
• Chain passes through the inside of the bail like a tunnel
• Internal bail opening: 8mm wide × 6mm tall (to fit thick Miami Cuban link chain)
⸻
Final Deliverable:
• One STL file (solid, mold-printable, Cura-compatible)
• No hollowing, no moving parts
• Must be clean mesh, fully watertight, and ready for printing with high detail