Create STL for threaded adapter
Budget: $30 – $250 USD
I'd like to 3D print a threaded adapter and would like someone to design the STL. I'll do my best to describe the specifications here:
1) The proposed print will be screwed onto an m25 x 0.5 thread. The thread needs to be 5 mm deep.
2) The total length of the adapter (including the 5mm deep thread) is 35 mm.
3) The other end does not itself need to be threaded, it simply needs an internal diameter of 42mm at the end closest to the M25 internal thread, tapering out slightly to an internal diameter of 43mm. This end is to accept a "pipe" or sorts, which has an external diameter of a little over 42mm.
Hopefully that's clear ?
1) The proposed print will be screwed onto an m25 x 0.5 thread. The thread needs to be 5 mm deep.
2) The total length of the adapter (including the 5mm deep thread) is 35 mm.
3) The other end does not itself need to be threaded, it simply needs an internal diameter of 42mm at the end closest to the M25 internal thread, tapering out slightly to an internal diameter of 43mm. This end is to accept a "pipe" or sorts, which has an external diameter of a little over 42mm.
Hopefully that's clear ?