Create STL files for 3d Printing
Budget: $30 – $250 CAD
I have a design for webcam projector which I need to modify to make it a health card scanner. the job is 3 parts
1) a slight modification to one STL file (5MP_Camera_head5.stl): I need to change the cover piece so that the circular whole is changed so that from one side its a Square for half of the thickness, while from the outside stays as it original design
2) a significant modification to another STL file ( Document_Camera_three_no_head_2_legs.stl): I need to change the design to shorten the two pieces in the file and have connect to each other using screw mechanism to enable me to adjust to the total length of the two pieces when they are connected together
3) create a new STL file from scratch: to print the different components of the product logo ( see the attached logo file)
4) create a third STL file from scratch: I need to create a base for the two pieces in file 2 to connect to: the base should have a try designed at the top of it with walls to fit specific card width and length. If possible I want the base to have a tilted front side ( 1-2 inch thick) with empty space to be filled the logo components printed from file 3
1) a slight modification to one STL file (5MP_Camera_head5.stl): I need to change the cover piece so that the circular whole is changed so that from one side its a Square for half of the thickness, while from the outside stays as it original design
2) a significant modification to another STL file ( Document_Camera_three_no_head_2_legs.stl): I need to change the design to shorten the two pieces in the file and have connect to each other using screw mechanism to enable me to adjust to the total length of the two pieces when they are connected together
3) create a new STL file from scratch: to print the different components of the product logo ( see the attached logo file)
4) create a third STL file from scratch: I need to create a base for the two pieces in file 2 to connect to: the base should have a try designed at the top of it with walls to fit specific card width and length. If possible I want the base to have a tilted front side ( 1-2 inch thick) with empty space to be filled the logo components printed from file 3