Collapsible Special Chair AutoCAD Drawings

I have drafted a collapsible special-needs chair which will be built from aluminium square tubing and now need a full manufacturing drawing set created in AutoCAD. My rough 3-D model will give you the overall geometry; your task is to translate it into workshop-ready drawings that a fabricator can follow without hesitation.

Exact dimensions are critical. Every cut length, hole position, miter angle, and clearance has to be called out clearly on the sheets. The frame unbolts for transport, then bolts up again into its working position, and carries two fixed wheels for simple tilt and pull-along mobility—no swivel or lockable mechanisms are required.

The frame is to be finished in a durable powder coat, so please show any masking or finish notes that affect the dimensions. I will supply a written performance specification (load rating, seat height range, etc.) for you to cross-check before finalising the drawings.

Deliverables
• DWG files organised by logical layers and views
• Print-ready PDFs (A3) showing orthographic views, sections, and a collapsed storage profile
• A short revision log describing any design tweaks needed to satisfy the spec

If you have recent examples of fabrication drawings for similar aluminium products, sharing one would speed up onboarding.