T-Box CAD Drawings for IKEA-Style Assembly
Budget: $250 – $750 AUD
I need some detailed CAD drawings for any cabinet maker to cut into ready for assembly in a flat pack IKEA style set of instructions for easy assembly upon arrival at the delivery address. Its to be made from standard sheets of F17 sheets and rolls of Nuwave MLV for the following scope of works:
Drawings are to be created/designed minimalizing an wastage of materials used.
We are creating a T shaped box/structure made of heavy duty structural ply ie (F17 https://www.bunnings.com.au/specrite-2400-x-1200mm-17mm-formply-f17_p0390224?store=8212&gclsrc=aw.ds&gad_source=1&gad_campaignid=20293657175&gbraid=0AAAAADtbEB_hxukTPDCIRGwszaGDVEtjx&gclid=CjwKCAiAwqHIBhAEEiwAx9cTedl2mUB8VK3jNpEJH6UOYbR37avKgE4O6Ebe_OaGQfpTnzZH86o-jBoCcJoQAvD_BwE ) combined with sound protective MLV (Mass Loaded Vinyl https://www.soundproofingproducts.com.au/product/nuwave-base-mass-loaded-vinyl/?srsltid=AfmBOopKJclSAs7a0u9W1wkjTyV8PxwNfiKPeVKTNhkMTYcHwB8skJCU ) that is designed to protect the inside working of inside this T shape box from the outside from any mechanical and environmental sound/vibrations so that the inside working of the box and our camera is not compromised in it operations.
Scope:
Creation of a parametric model of T-box in 17 mm F17: 2100 top × 480 deep, stem 400
× 1000, shoulders 200, RH notch 650 @ 620 drop, height 800.
Additional details:
1. Six inset doors: 2×645×795, 2×615×795, 2×995×795; three 75 mm SS butt
hinges each; gaps 2.5 mm, 3.0 mm at meetings.
2. Stops: set back 16.5 mm with EPDM 5×25 on planted stops.
3. Door lining: NuWave BASE 5 full mats inside perimeter frame.
4. Interior lining: same concept as doors on internal faces, with cleats, full mats,
seam and adhesive notes, cut maps from 1350-mm roll.
Considerations and Inclusions:
1. Panelization and nesting to 2400×1200, dog-bones, drill maps.
2. Cut list and bill of materials (BOM)
3. DXF/DWG per panel.
4. Assembly map with matched marks on parts (e.g., A_A, B_B).
Assumptions:
1. Square geometry, one internal partition scheme, no drawers.
2. Standard tolerances
Drawings are to be created/designed minimalizing an wastage of materials used.
We are creating a T shaped box/structure made of heavy duty structural ply ie (F17 https://www.bunnings.com.au/specrite-2400-x-1200mm-17mm-formply-f17_p0390224?store=8212&gclsrc=aw.ds&gad_source=1&gad_campaignid=20293657175&gbraid=0AAAAADtbEB_hxukTPDCIRGwszaGDVEtjx&gclid=CjwKCAiAwqHIBhAEEiwAx9cTedl2mUB8VK3jNpEJH6UOYbR37avKgE4O6Ebe_OaGQfpTnzZH86o-jBoCcJoQAvD_BwE ) combined with sound protective MLV (Mass Loaded Vinyl https://www.soundproofingproducts.com.au/product/nuwave-base-mass-loaded-vinyl/?srsltid=AfmBOopKJclSAs7a0u9W1wkjTyV8PxwNfiKPeVKTNhkMTYcHwB8skJCU ) that is designed to protect the inside working of inside this T shape box from the outside from any mechanical and environmental sound/vibrations so that the inside working of the box and our camera is not compromised in it operations.
Scope:
Creation of a parametric model of T-box in 17 mm F17: 2100 top × 480 deep, stem 400
× 1000, shoulders 200, RH notch 650 @ 620 drop, height 800.
Additional details:
1. Six inset doors: 2×645×795, 2×615×795, 2×995×795; three 75 mm SS butt
hinges each; gaps 2.5 mm, 3.0 mm at meetings.
2. Stops: set back 16.5 mm with EPDM 5×25 on planted stops.
3. Door lining: NuWave BASE 5 full mats inside perimeter frame.
4. Interior lining: same concept as doors on internal faces, with cleats, full mats,
seam and adhesive notes, cut maps from 1350-mm roll.
Considerations and Inclusions:
1. Panelization and nesting to 2400×1200, dog-bones, drill maps.
2. Cut list and bill of materials (BOM)
3. DXF/DWG per panel.
4. Assembly map with matched marks on parts (e.g., A_A, B_B).
Assumptions:
1. Square geometry, one internal partition scheme, no drawers.
2. Standard tolerances
Related categories:
CAD/CAM
Solidworks
AutoCAD
Product Design
3D Modelling
3D Design
Drafting
Building Design