Basic 3D Architectural AutoCAD Drawings

I'm in need of a few AutoCAD drawings focused on basic 3D architectural massing. The project will involve:

- Using AutoCAD to produce detailed, layerable 3D model

Ideal candidates for this project should possess:
- Proficiency in AutoCAD with a focus on architectural design
- Experience in creating 3D massing models


I would need you to build the model described in the below step by step directions. Beforehand, you would please confirm whether the directions provided are complete enough to draw a structure/shape. In case this is not complete, please inform what is missing so i can gather the remaining informations.

Step by step directions:

Set up the working environment:

Launch AutoCAD and create a new drawing.
Type "UNITS" in the command line and set units to Meters.


Create the circular base:

Type "CIRCLE" and create a circle with a radius of 5 meters at point (0,0,0).


Draw the inscribed pentagon:

Use the "POLYGON" command to create a pentagon inscribed in the circle.


Create the main parabolic arc:

Type "3DPOLY" to start a 3D polyline.
Click on a point on the base circle, then at the center at a height of 3.09m (0,0,3.09), and finally on the opposite point of the circle.
Use the "PEDIT" command to convert this polyline into a smooth arc.


Generate the 24 main arcs:

Use the "ARRAY" command with the Polar option to copy the arc 24 times around the center.


Create the Fibonacci spiral:

Use the "HELIX" command to create a spiral.
Adjust its parameters to follow the Fibonacci sequence.


Add secondary arcs:

Create thinner arcs between the main arcs using "3DPOLY" and "PEDIT".


Add horizontal rings:

Use the "CIRCLE" command at different heights, following the Fibonacci sequence.
Use "INTERSECT" to create intersections with vertical arcs.


Create the top and skylight:

At the summit, use "CIRCLE" to create the top ring.
Use "SUBTRACT" to create the skylight opening.


Model the bamboo elements:

Use the "SWEEP" command to create tubes along the arcs, representing bamboo.
Adjust the diameter for main arcs (10cm) and secondary arcs (5-7cm).


Create the cross-section view:

Use the "SECTION" command to create a cross-section of the dome.


Add textures and materials:

Use the materials palette to apply a bamboo texture to the elements.


Set up lighting and rendering:

Use the "RENDER" command to create a realistic render of your model.


Create views and layouts:

Use "VIEWPORTS" to create different views of your model (plan, elevation, perspective).


Add dimensions and annotations:

Use 3D dimensioning commands to add precise measurements.