3D/Vector Illustrator Needed for Large Trade Show Banners (HVAC/R Systems)
Budget: €250 – €450 EUR
Project Overview: We are looking for a skilled illustrator or 3D artist to create two high-definition, stylized images for a trade show exhibition. These images will be printed on large vertical banners (approximately 3 meters high), so extremely high resolution and attention to detail are mandatory.
We will provide reference files for the base shapes, the products, and the schematic flow. The goal is to make these technical concepts visually appealing, modern, and easy to understand for trade show attendees.
Image 1: Stylized Boat Cutaway (HVAC/R Systems)
Base Reference: Final.jpg (Boat profile) Task: Create a stylized cross-section/cutaway of the boat showing the internal routing and placement of our marine systems.
The cutaway must clearly highlight the following 5 distinct zones:
A) Engine Room (Bottom Aft/Rear):
Must show a Chiller (reference: products_chiller).
Connected to two Calpeda-style pumps: One for seawater intake (bringing water to the chiller) and one for freshwater circulation (distributing water to and from the boat's main system).
B) Office-style Cabin:
Must show two mounted Fan Coils (reference: products_fancoil) with visible air ducting.
Must show water piping connecting the fan coils to the main circulation system.
Must show an external ventilation air pipe coming into the cabin from a centralized AHU (Air Handling Unit) system.
C) Adjacent Small Bathroom:
Must clearly highlight an air extraction duct.
D) Lower Deck Cold Room:
Must show a Cold Room (reference: products_cold room.png).
Connected to its dedicated compressor/condensing unit in the engine room (reference: products_condensing units).
The condensing unit must be shown taking water from a branched pipe connected to the main chiller's seawater pump.
E) Lower Deck Battery Room:
Must show an area with water-cooled batteries.
Must highlight the piping connecting these batteries to the chiller's main circulation system for cooling.
Image 2: Aesthetic Schematic Overhaul
Base Reference: WATER PIPING AND ER modificata.pdf (Generic system diagram) Target Style: Gemini_Generated_Image_dycgmjdycgmjdycg.png Task: Redesign the generic technical diagram to make it visually striking for an exhibition.
Rule: You must not change the technical logic, connections, or flow of the original PDF schematic.
Goal: Completely upgrade the aesthetics. Transform the basic lines and boxes into a modern, beautifully stylized, and polished infographic that matches the provided target style.
Technical Requirements:
Output Size: Suitable for printing on banners approximately 3 meters high.
Format: Vector format (.AI) is highly preferred for infinite scaling.
Color Profile: CMYK (Print-ready).
Source Files: Must provide the fully editable source files upon project completion, along with print-ready PDFs and high-res PNGs.
How to Apply: Please provide a link to your portfolio, specifically highlighting any previous similar projects.
We will provide reference files for the base shapes, the products, and the schematic flow. The goal is to make these technical concepts visually appealing, modern, and easy to understand for trade show attendees.
Image 1: Stylized Boat Cutaway (HVAC/R Systems)
Base Reference: Final.jpg (Boat profile) Task: Create a stylized cross-section/cutaway of the boat showing the internal routing and placement of our marine systems.
The cutaway must clearly highlight the following 5 distinct zones:
A) Engine Room (Bottom Aft/Rear):
Must show a Chiller (reference: products_chiller).
Connected to two Calpeda-style pumps: One for seawater intake (bringing water to the chiller) and one for freshwater circulation (distributing water to and from the boat's main system).
B) Office-style Cabin:
Must show two mounted Fan Coils (reference: products_fancoil) with visible air ducting.
Must show water piping connecting the fan coils to the main circulation system.
Must show an external ventilation air pipe coming into the cabin from a centralized AHU (Air Handling Unit) system.
C) Adjacent Small Bathroom:
Must clearly highlight an air extraction duct.
D) Lower Deck Cold Room:
Must show a Cold Room (reference: products_cold room.png).
Connected to its dedicated compressor/condensing unit in the engine room (reference: products_condensing units).
The condensing unit must be shown taking water from a branched pipe connected to the main chiller's seawater pump.
E) Lower Deck Battery Room:
Must show an area with water-cooled batteries.
Must highlight the piping connecting these batteries to the chiller's main circulation system for cooling.
Image 2: Aesthetic Schematic Overhaul
Base Reference: WATER PIPING AND ER modificata.pdf (Generic system diagram) Target Style: Gemini_Generated_Image_dycgmjdycgmjdycg.png Task: Redesign the generic technical diagram to make it visually striking for an exhibition.
Rule: You must not change the technical logic, connections, or flow of the original PDF schematic.
Goal: Completely upgrade the aesthetics. Transform the basic lines and boxes into a modern, beautifully stylized, and polished infographic that matches the provided target style.
Technical Requirements:
Output Size: Suitable for printing on banners approximately 3 meters high.
Format: Vector format (.AI) is highly preferred for infinite scaling.
Color Profile: CMYK (Print-ready).
Source Files: Must provide the fully editable source files upon project completion, along with print-ready PDFs and high-res PNGs.
How to Apply: Please provide a link to your portfolio, specifically highlighting any previous similar projects.
Related categories:
Graphic Design
Illustration
3D Modelling
Adobe Illustrator
Vector Design
3D Graphic Design
3D Illustration