Shapr3D Plastic Enclosure Model

I have sketches and a set of reference photos for a small electronics project and I need them translated into a precise 3D model in Shapr3D. The enclosure will ultimately be 3d printed on a Bambu Labs P2S out of PLA. Overall outer dimensions are: 146mm long x 90mm wide x 78mm high. 3mm thick walls on all sides. Box base will be 60mm high, and the lid will be 18mm high.

Key design notes
• Two-part body with a reliable snap-fit closure that can be opened and closed repeatedly without stressing the tabs.
• Internal standoffs/mounting bosses aligned to my PCB layout (I’ll supply the board file and dimensions).
• Clean access ports for USB-C, and a Micro-SD card with an indention for your finger to grab these.
• 2 small hexagon speaker grills on the front and left side—similar to the pattern shown in the reference image.
• Rounded/radius corner on all sides, except the bottom.


Deliverables
- Native Shapr3D file (.shapr) with parametric history intact
- Exported STEP and STL for tooling review
- Maintain dimensions specified.

I’ll share the sketches, photos and board as soon as we start. Let me know your estimated turnaround time and any questions you have about the snap geometry or port placement.