3D Printable Interlocking Display System

Freelancer Workload Brief (Non-Specific, IP-Safe Version)

Project Title:
Modular Wall-Mount Display System — 3D Printable Parts


---
Scope of Work:

We’re developing a modular wall-mounted display system made up of interlocking panels. These parts will be 3D printed and designed to fit together using standardized connection points such as hinges, pins, and magnets.


---

Core Deliverables:

1. Modular Tile – Small Format (1x1)

A basic tile with front-facing insert window

Right-edge version includes a print-in-place hinge with 3mm pin hole

Flat bottom for clean bed adhesion (brimless)



2. Receiver Tile – Small Format

A mirror version of the above

Accepts hinge pin connection from the right-hinge tile

Should align seamlessly when joined



3. Horizontal Panel (3x1)

Rigid one-piece layout with three insert openings

Includes magnet pockets (6mm x 2mm) in the outer corners

Optional: Simple alignment or lock tab system



4. Grid Panel (3x3)

Single-piece layout with 9 insert slots in a 3x3 arrangement

Recessed frame, optional mounting holes

Compatible with same locking/magnet layout as smaller units



5. Window Insert – Alternate Dimensions

Create a module similar to the 1x1 design but with modified internal dimensions

Smooth internal edges; no sharp retention features

Optional: Face cover (snap-on or slide-in)



6. Large Format Display Frame

Rigid panel sized for medium-large inserts (e.g., A4 or A3)

Edge-compatible with smaller tiles using same locking/tab system

Wall-mountable (screw or magnet slots optional)





---

Design Principles:

All modules must connect via a shared hinge/tab/magnet interface

Designed for FDM printing, preferably support-free

Materials: PLA or PETG

Wall-mounted usage

Prioritize modularity, stackability, and ease of print



---
Deliverables:

.STL files for all parts

Source files (Fusion 360, SolidWorks, or OpenSCAD preferred)

Basic assembly or layout screenshots (optional but helpful)



---

Timeline:

Phase 1: 1x1 Hinge Module + 3x1 Panel within 5–7 days

Phase 2: 3x3 Grid + Alternate Window + Large Format Panel by Day 14



---
Notes:

Exact internal dimensions and fit tolerances will be provided after agreement

Visual mockups or sketches can be shared after NDA if required

This project is part of a larger modular system under development